Mirror Accessories

Mirror Accessories: the small hardware that fixes mirror fit and finish

Mirror accessories are the brackets, adapters, extenders, relocators and block-off plates that let you mount, move, or delete a mirror without swapping the mirror itself. Fit a relocator or a set of extenders and you push the mirror head out past your shoulders or a wide fairing to clear the blind spot behind your elbows. Fit an internal adapter and a mirror sized for one handlebar thread drops onto a bar it wasn't cut for. Fit a block-off plate and the empty mirror boss on a track-prepped bike gets covered cleanly instead of leaving an open hole.

What ThreePiece stocks

This category currently shows 10 products from 4 brands: Kuryakyn (5 in the sample), CRG Constructors (3), Bikers Choice (1) and New Rage Cycles (1). Prices run from a current $31 up to $319 for what is in stock now - that spread is live inventory, not a standing promise. At the top end sits the Kuryakyn Adjustable Mirror Relocator 6575, with the Kuryakyn 3in Outward Stem Extenders in black further down. The adapter and clamp end covers the affordable side, including the CRG Internal Adapter for 7/8 in. bars, the CRG Internal Adapter for 1 in. bars, and the Bikers Choice Chrome Mirror Clamp for 1 inch bars. For riders deleting mirrors, the New Rage Cycles Block Off Plates are cut for the 2009-2020 Aprilia RSV4.

How to choose

Start with what you're trying to do. If your existing mirror sits too close, you want a relocator or extender - the adjustable Kuryakyn relocator gives you the most positioning freedom, the fixed 3in stem extenders are simpler and cheaper. If the mirror itself is fine but won't thread onto your bar, size the fix to your bar's outside diameter: the CRG adapters are split by 7/8 in. and 1 in. handlebars, so measure before you order. A universal clamp like the Bikers Choice unit adds a mounting point where none exists. Block-off plates are the opposite job entirely - they remove a mirror, so buy those only against a confirmed fitment.

Note the honest limit here: only 1 of these products lists specific vehicle fitment, the Aprilia RSV4 block-off plates. Everything else is sold by bar size or as universal hardware, so the burden is on you to match thread and diameter.

What else you need with it

These pieces work with the mirror they carry - browse the full Mirrors category if you're replacing the head too. Changing bars affects mirror mounting, so check Handlebars at the same time. If you're building out visibility overall, look at Turn Signals and the wider Lighting range. All of this sits under the Exterior section.

Fitment help and ordering

Unsure whether an adapter matches your bar or a plate matches your bike? Call fitment help at 813-535-5801 or use Contact Us. Every order ships free, and Affirm and Katapult financing is available at checkout.

Mirror Accessories: the small hardware that fixes mirror fit and finish

Mirror accessories are the brackets, adapters, extenders, relocators and block-off plates that let you mount, move, or delete a mirror without swapping the mirror itself. Fit a relocator or a set of extenders and you push the mirror head out past your shoulders or a wide fairing to clear the blind spot behind your elbows. Fit an internal adapter and a mirror sized for one handlebar thread drops onto a bar it wasn't cut for. Fit a block-off plate and the empty mirror boss on a track-prepped bike gets covered cleanly instead of leaving an open hole.

What ThreePiece stocks

This category currently shows 10 products from 4 brands: Kuryakyn (5 in the sample), CRG Constructors (3), Bikers Choice (1) and New Rage Cycles (1). Prices run from a current $31 up to $319 for what is in stock now - that spread is live inventory, not a standing promise. At the top end sits the Kuryakyn Adjustable Mirror Relocator 6575, with the Kuryakyn 3in Outward Stem Extenders in black further down. The adapter and clamp end covers the affordable side, including the CRG Internal Adapter for 7/8 in. bars, the CRG Internal Adapter for 1 in. bars, and the Bikers Choice Chrome Mirror Clamp for 1 inch bars. For riders deleting mirrors, the New Rage Cycles Block Off Plates are cut for the 2009-2020 Aprilia RSV4.

How to choose

Start with what you're trying to do. If your existing mirror sits too close, you want a relocator or extender - the adjustable Kuryakyn relocator gives you the most positioning freedom, the fixed 3in stem extenders are simpler and cheaper. If the mirror itself is fine but won't thread onto your bar, size the fix to your bar's outside diameter: the CRG adapters are split by 7/8 in. and 1 in. handlebars, so measure before you order. A universal clamp like the Bikers Choice unit adds a mounting point where none exists. Block-off plates are the opposite job entirely - they remove a mirror, so buy those only against a confirmed fitment.

Note the honest limit here: only 1 of these products lists specific vehicle fitment, the Aprilia RSV4 block-off plates. Everything else is sold by bar size or as universal hardware, so the burden is on you to match thread and diameter.

What else you need with it

These pieces work with the mirror they carry - browse the full Mirrors category if you're replacing the head too. Changing bars affects mirror mounting, so check Handlebars at the same time. If you're building out visibility overall, look at Turn Signals and the wider Lighting range. All of this sits under the Exterior section.

Fitment help and ordering

Unsure whether an adapter matches your bar or a plate matches your bike? Call fitment help at 813-535-5801 or use Contact Us. Every order ships free, and Affirm and Katapult financing is available at checkout.