What's the Difference Between Wheel Offset and Backspacing?

By THREEPIECE.US Published Nov 15th 2026
Editorial note: ThreePiece.us fitment guides are maintained by our wheel and tire fitment team.

Offset is the distance in millimeters from the centerline of the wheel to the face that bolts against your hub, and backspacing is the distance in inches from that same face to the back edge of the wheel. They measure the same thing from two different starting points, so if you know one of them and the width of the wheel you can work out the other.

What offset tells you

Offset is written as a plus or minus number, like +35, and you'll also see it marked as ET35, which means the same thing. A positive number means the mounting face sits toward the street side of the centerline, so the wheel tucks further in under the car. A negative number means the mounting face sits toward the brake side, so the wheel sits further out, and zero means the mounting face is right on the centerline.

The handy part is that offset moves one for one. If your current wheels are +45 and the new ones are +35 in the same width, the new wheel sits 10 mm further out toward the fender, and going the other way to +55 would pull it 10 mm in toward the suspension.

What backspacing tells you

Backspacing tells you how much of the wheel sits behind the mounting face, which is the part that has to clear your suspension and brakes. More backspacing means more wheel on the inside, so the wheel sits further in. It depends on the width as well as the offset, which is why two wheels with the same offset and different widths have different backspacing.

How to convert one to the other

Take the overall width of the wheel, which is about one inch more than the size it's sold as because the listed width is measured between the bead seats and not across the outer edges. Half of that overall width is the centerline. Backspacing is the centerline plus the offset, once you've turned the offset into inches by dividing by 25.4, and for a negative offset you subtract.

So a 9 inch wide wheel is about 10 inches overall, which puts the centerline at 5 inches. With a +35 offset (1.38 inches) the backspacing is 6.38 inches, and with a -12 offset (0.47 inches) it's 4.53 inches.

Backspacing in inches for common widths and offsets
Offset8 inch wide wheel9 inch wide wheel10 inch wide wheel
-44 mm2.773.273.77
-12 mm4.034.535.03
0 mm4.505.005.50
+20 mm5.295.796.29
+35 mm5.886.386.88
+45 mm6.276.777.27

If you'd rather not do the math, our offset and backspacing calculator converts in both directions, and the wheel offset calculator shows how far a new width and offset will move the wheel compared with what's on the car now.

What to do with the numbers

Start from the wheels you have. Find their width and offset, decide how much further out or in you want the new set to sit, and then check both edges, because a wheel that's wider and lower in offset moves out at the fender and can still move in toward the strut. The wheel fitment calculator shows both edges at once. If you don't know the offset of your current wheels, here's how to measure it, and if you'd like us to check a setup before you order, call or text 813-535-5801.

Does a lower offset make the wheels stick out more?

Yes. Every millimeter you take off the offset moves the wheel one millimeter further out toward the fender, as long as the width stays the same. Going from +45 to +30 moves the wheel out 15 mm.

What does -12 offset mean?

It means the mounting face is 12 mm toward the brake side of the wheel's centerline, which pushes the wheel outward. On a 9 inch wide wheel a -12 offset works out to about 4.5 inches of backspacing.

What does ET mean on a wheel?

ET is how offset is marked on a lot of wheels. ET35 is the same as a +35 mm offset, and ET0 is zero offset.

Free shipping on all wheel & tire packages

Shop wheels for your car

Pick your year, make and model and see the wheels that fit.