TPMS stands for tire pressure monitoring system, and it's what turns on the low tire warning light on your dash when a tire drops 25 percent or more below the pressure on your door placard. Cars and light trucks up to 10,000 lb built for the US on or after September 1, 2007 are required to have one, so when you change wheels you either move your sensors over or fit new ones if you want that light to stay off.
How it works
There are two kinds. A direct system has a small battery-powered pressure sensor inside each wheel, usually on the back of the valve stem, and each sensor sends its reading to the car by radio. An indirect system has no sensors in the wheels at all and works out that a tire is low from the wheel speed sensors the ABS already uses.
If your car has an indirect system, new wheels don't need sensors. Everything below is about direct systems, because those are the ones with sensors in the wheels.
Your options with aftermarket wheels
| Situation | What to do | What happens at the car |
|---|---|---|
| The new wheels replace your old ones | Have the shop move your existing sensors into the new wheels when the tires are mounted. | The car already knows those sensors. |
| You're keeping the old set, for winter tires or track days | Put a second set of sensors in the new wheels. | The car has to learn the new sensors, and usually learn the old ones again when you swap back. |
| Your sensors are old or one has failed | Replace them while the tires are off. | The car has to learn the new sensors. |
| No sensors in the new wheels | Nothing is fitted. | The TPMS light comes on and stays on. |
The learning step is called a relearn, and it's a set of steps the vehicle manufacturer lays out so the car picks up each sensor's ID number. On some cars it's done from the menu in the dash and on others the shop uses a TPMS tool, so check your owner's manual or ask whoever is mounting the tires.
Things to check before you buy sensors
Sensors aren't all the same. They transmit on different radio frequencies, typically 315 or 433 MHz, and the sensor has to match what your car listens for. They also come with two kinds of valve stem: a clamp-in sensor has a threaded metal stem held by a nut, and a snap-in sensor has a rubber-coated stem that pulls into the valve hole like a regular valve stem.
Age matters too. The battery inside a sensor is sealed in and can't be replaced, and Continental puts the typical life at 5 to 10 years. If your car is getting on toward that and you're paying to have tires mounted anyway, it's a sensible time to replace the sensors and not have to break the tires down again a year later.
What we carry
We sell TPMS sensors and valve stems, and you'll find sensors with the lug nuts and hub rings in Finish Your Installation Kit. For a deeper walk through a wheel swap, read our TPMS sensor guide. If you tell us the year, make and model, we'll tell you which sensor it takes, so call or text 813-535-5801.
How long do TPMS sensors last?
Typically 5 to 10 years, according to Continental. The battery is sealed inside the sensor and can't be replaced, so when it runs down the whole sensor is replaced.
Can you reuse TPMS sensors on new wheels?
Usually, yes. Your existing sensors can be moved into the new wheels when the tires are mounted, and the car already knows them. If you're keeping your old wheels as a second set, the new wheels need their own sensors.
What's the difference between direct and indirect TPMS?
A direct system has a pressure sensor inside each wheel. An indirect system has no sensors in the wheels and uses the ABS wheel speed sensors to detect a tire that's low.