VF484

American Racing Forged VF484: Monoblock Strength for Trucks and Cars

The American Racing Forged VF484 is a monoblock wheel with a clean, purposeful face built to sit under everything from lowered cars to fitted trucks. This model belongs to the American Racing Forged lineup, where the single-piece VF484 covers a wide spread of diameters and bolt patterns. The face is understated and structural, letting the polished surface and your caliper setup do the talking rather than a busy spoke pattern.

Sizes and Fitments in Stock

The VF484 runs in 18, 20 and 24-inch diameters, with widths of 8, 9 and 10 inches. Offsets stocked span -13, 0, +25, +29 and +38, so there is room for aggressive fitments as well as more conservative setups. Bolt patterns cover 5x114.3, 5x120.65, 5x127 and 6x139.7, which brings in a broad range of cars, SUVs and half-ton trucks.

Concrete examples show how it lays out: the 18x9 +38 in 5x127 polished is a tidy, tucked setup, while the 18x8 +0 in 5x114.3 pushes closer to the fender lip. Going wider, the 20x10 -13 in 5x120.65 is a proper deep-lip stance, and the 24x10 +29 in 6x139.7 suits full-size trucks. There's also an 18x9 +25 in 5x114.3 for a middle-ground fit.

Finishes

The VF484 is offered in Polished and Custom Finishes, so you can run a bright mirror face or spec something to match your build.

Price and Who It Suits

Pricing runs from $784 to $1,227 per wheel depending on size and finish. It suits builders who want a monoblock wheel that works across cars and trucks alike, and who value a simple face over fussy detailing. Financing is available at checkout through Affirm, Katapult, Klarna, PayPal Credit and Snap Finance, as low as 0% APR, with zero-down and no-credit-needed options.

Within the same forged range, the VF485 and VF480 are close siblings with different face treatments, the VF481 offers another spoke look, and the MR409 and VF522 round out the options if the VF484 stance isn't quite what you need. Prefer a specific bolt pattern? Browse 5x127 wheels or 5x114.3 wheels to compare.

Ordering

Not sure what works on your car or truck? Run the numbers through our wheel fitment calculator or call 813-535-5801 for help. ThreePiece is an authorized dealer selling 100% genuine wheels, with free shipping on all orders and 30-day returns on unmounted wheels.

American Racing Forged VF484: Monoblock Strength for Trucks and Cars

The American Racing Forged VF484 is a monoblock wheel with a clean, purposeful face built to sit under everything from lowered cars to fitted trucks. This model belongs to the American Racing Forged lineup, where the single-piece VF484 covers a wide spread of diameters and bolt patterns. The face is understated and structural, letting the polished surface and your caliper setup do the talking rather than a busy spoke pattern.

Sizes and Fitments in Stock

The VF484 runs in 18, 20 and 24-inch diameters, with widths of 8, 9 and 10 inches. Offsets stocked span -13, 0, +25, +29 and +38, so there is room for aggressive fitments as well as more conservative setups. Bolt patterns cover 5x114.3, 5x120.65, 5x127 and 6x139.7, which brings in a broad range of cars, SUVs and half-ton trucks.

Concrete examples show how it lays out: the 18x9 +38 in 5x127 polished is a tidy, tucked setup, while the 18x8 +0 in 5x114.3 pushes closer to the fender lip. Going wider, the 20x10 -13 in 5x120.65 is a proper deep-lip stance, and the 24x10 +29 in 6x139.7 suits full-size trucks. There's also an 18x9 +25 in 5x114.3 for a middle-ground fit.

Finishes

The VF484 is offered in Polished and Custom Finishes, so you can run a bright mirror face or spec something to match your build.

Price and Who It Suits

Pricing runs from $784 to $1,227 per wheel depending on size and finish. It suits builders who want a monoblock wheel that works across cars and trucks alike, and who value a simple face over fussy detailing. Financing is available at checkout through Affirm, Katapult, Klarna, PayPal Credit and Snap Finance, as low as 0% APR, with zero-down and no-credit-needed options.

Within the same forged range, the VF485 and VF480 are close siblings with different face treatments, the VF481 offers another spoke look, and the MR409 and VF522 round out the options if the VF484 stance isn't quite what you need. Prefer a specific bolt pattern? Browse 5x127 wheels or 5x114.3 wheels to compare.

Ordering

Not sure what works on your car or truck? Run the numbers through our wheel fitment calculator or call 813-535-5801 for help. ThreePiece is an authorized dealer selling 100% genuine wheels, with free shipping on all orders and 30-day returns on unmounted wheels.