Spectre Coupler Elbow Reducer 3in. / 90 Degree w/2.5in. Insert (PVC) - Black - 8791
Free Shipping
This wheel on real customer builds
Made by our team · tap a video to play it
Verify parts fit & get product recommendations
Universal fit — no vehicle restriction.
Spectre's Header-Collector Reducer kit includes two 3 to 2 1/2 inch header reducers and a set of extra thick 1/8 inch gaskets. The header-collector reducers are nickel plated for a long lasting, great looking finish. These header-collector reducers also have a 3-bolt welded on flange with a 2-1/2 inch reducer pipe to allow you to attach a 2-1/2 inch pipe to a 3 inch flange. The gaskets are compressed of ceramic fiber (CCF), which is designed to exceed typical non-asbestos type gaskets. The CCF is designed to not deteriorate or crack from excessive heat or pressure. This universal application includes necessary nuts and bolts made from nickel plated steel.
Spectre's Header-Collector Reducer kit includes two 3 to 2 1/2 inch header reducers and a set of extra thick 1/8 inch gaskets. The header-collector reducers are nickel plated for a long lasting, great looking finish.
Have you tried this product?
WRITE A REVIEWNo reviews for this product yet. Be the first to write a review!
This is a universal part: it is not tied to one vehicle. Check the Part details and the maker's guide for the sizes it is made for.
The sound depends on the muffler and resonator design. A cat-back with a resonator stays closer to stock; an axle-back changes the tone more than the volume. Look for the maker's sound notes or a clip on this page.
Cat-back and axle-back systems bolt to the factory connection points. Headers and downpipes replace the factory pipe at the engine and may need new gaskets and hardware; see What's in the box.
A cat-back or axle-back needs no tune. Headers and downpipes change what the oxygen sensors see, so many cars need a tune or a sensor spacer to avoid a warning light.
Drone depends on the muffler and resonator design and your car's gearing. Systems with a resonator or an X-pipe drone less, and the maker notes when a system is built to be quiet at cruise.
An axle-back or cat-back is a jack-stands job with the right sockets and penetrating oil for rusty bolts. Headers and downpipes take more room and time, and a lift helps.
Most systems include the clamps and gaskets they need; see What's in the box. Reuse a factory gasket only if it is undamaged.
Yes — monthly options show right under the Add to Cart button. Affirm, Klarna, PayPal Pay Later and Snap Finance are offered at checkout, and checking what you qualify for does not affect your credit score.
It steps 3 inch down to 2-1/2 inch. A 3-bolt flange with a 2-1/2 inch reducer pipe lets a 2-1/2 inch pipe attach to a 3 inch flange.
They're 1/8 inch thick compressed ceramic fiber, designed not to deteriorate or crack from excessive heat or pressure.
They're nickel plated for a long-lasting finish, with nickel plated steel nuts and bolts.