Price Match Guarantee 
Free Shipping
Out of stock
SPC Performance L RND RECVR 7/8-14 - 15097
This wheel on real customer builds
See this part on video
Made by our team · tap a video to play it
📧 Get Fitment Help
Verify parts fit & get product recommendations
SPC Performance
SKU:
SPC15097
|
- UPC:
- 082642150978
$105.01
Other SPC Performance kits for this car
Fits these vehicles
Fitment not listed for this part yet — call or text 813-535-5801 and we will confirm it for your car.
Part details
- Part number
- SPC15097
- Manufacturer part number
- 15097
- UPC
- 082642150978
- Brand
- SPC Performance
- Part type
- Control Arms
- Prop 65
- ⚠️ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
- Special order
- Yes — ordered in for you; allow extra time
- Instructions
- Installation instructions (PDF)
Installation guide (from SPC Performance)
Hosted by SPC Performance. Follow the maker's instructions and torque specs.
- Box size:
- 2.00 × 1.00 × 4.00 (in)
Finance it — pay over time
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
Low monthly payments
Affirm, Klarna or PayPal Pay Later: see your exact plan at checkout. Checking won’t affect your credit score.
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
- Affirm
- Klarna
- PayPal Pay Later
- Snap Finance
📧 Get Fitment Help
Verify parts fit & get product recommendations
Complete the job
Read before you buy
-
-
Out of stock
-
Out of stock
-
Out of stock
Thread Size 7/8"-14 Outside Dia. 1.260" Thread Length 1.5" Overall Length 2.250" Nominal Tube Size 1.500" OD Recommended Tube Wall Thickness 0.120" Recommended Tube Wall Thickness 0.065" Bulk Pack Of (6) California Residents WARNING
Thread Size 7/8"-14 Outside Dia. 1.260" Thread Length 1.5" Overall Length 2.250" Nominal Tube Size 1.500" OD Recommended Tube Wall Thickness 0.120" Recommended Tube Wall Thickness 0.065" Bulk Pack Of (6)
LH ROD END RECVR 7/8-14 RND
LH ROD END RECVR 7/8-14 RND
- Thread Size: 7/8" - 14, Outside Diameter: 1.260", Overall Length 2.250"
- 4140 N Chromoly Steel and Grade 8 Bolt
- Left Hand thread rod end receiver
- Welds into stock tubing sizes
- Clearance Item:
- N
- LTL:
- N
- MPN:
- 15097
- Proposition 65:
- Y
- Special Order:
- Y
PRODUCT REVIEWS (0)
Overall Rankings
Have you tried this product?
WRITE A REVIEWNo reviews for this product yet. Be the first to write a review!
Write a Review
SPC Performance
SPC Performance L RND RECVR 7/8-14 - 15097
SPC Performance L RND RECVR 7/8-14 - 15097 FAQ
The maker's installation guide is on this page — see Installation guide under the part details for the step-by-step and the torque figures. Work on level ground with the car properly supported, and torque every fastener to the maker's figure. If the job is beyond your tools, any shop that does this kind of work can fit it.
Yes, every time a control arm is replaced: its ball joint and bushings set camber and toe.
Usually, when the arm is a complete assembly; the Part details and the maker's guide say what is included.
A lowered or lifted car pushes camber outside the stock range; adjustable arms bring it back so the tires wear evenly.
Replace both sides when the car is lowered or lifted so both corners adjust the same way. A single worn arm can be replaced on its own.
Torque the bushing bolts with the car at ride height, not hanging on a lift, or the bushings bind and wear early.
Yes — monthly options show right under the Add to Cart button. Affirm, Klarna, PayPal Pay Later and Snap Finance are offered at checkout, and checking what you qualify for does not affect your credit score.
Install and care: control arms
Before you start
- Mark the position of any adjustable bolts before removing the old arm.
- Book an alignment for after the install.
Do
- Torque the bushing bolts with the car at ride height.
- Get the alignment done before putting miles on the car.
Don't
- Don't drive on new arms before the alignment.
- Don't reuse stretched or rusted bolts.