Price Match Guarantee 
Free Shipping
LOW STOCK (5 kits)
SPC Performance Cobra IRS XAXIS Joint Set (4) - 72062
This wheel on real customer builds
See this part on video
Made by our team · tap a video to play it
📧 Get Fitment Help
Verify parts fit & get product recommendations
SPC Performance
SKU:
SPC72062
|
- UPC:
- 082642720621
- Availability:
- Regularly stocked product
$295.95
$321.69
(You save
$25.74
)
Other SPC Performance kits for this car
Fits these vehicles
- 2003-2004 Ford MustangSVT Cobra
- 2001 Ford MustangSVT Cobra
- 1999 Ford MustangSVT Cobra
- 2003 Ford MustangSVT Cobra 10th Anniversary
- 2000 Ford MustangSVT Cobra R
Part details
- Part number
- SPC72062
- Manufacturer part number
- 72062
- UPC
- 082642720621
- Brand
- SPC Performance
- Prop 65
- ⚠️ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
- Instructions
- Installation instructions (PDF)
Installation guide (from SPC Performance)
Hosted by SPC Performance. Follow the maker's instructions and torque specs.
- Box size:
- 5.00 × 3.40 × 5.80 (in)
Finance it — pay over time
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
Low monthly payments
Affirm, Klarna or PayPal Pay Later: see your exact plan at checkout. Checking won’t affect your credit score.
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
- Affirm
- Klarna
- PayPal Pay Later
- Snap Finance
📧 Get Fitment Help
Verify parts fit & get product recommendations
Complete the job
Read before you buy
SPC Performance Cobra IRS XAXIS Joint Set (4) - 72062
$295.95
-
-
SPC Performance xAxis Replacement Bushing Kit for SPC Arms (PN: 25460) - 25031
$271.45Free Shipping
-
SaleOnly 4 left in stock
SPC Performance xAxis Bushing Upgrade Kit for 25470 & 25480 - 25022
Was $220.93 $168.16$220.93Free Shipping
-
Only 2 left in stock
Replace worn rear knuckle cross axis ball joints on the IRS Mustang Cobra with xAxis joints from SPC Performance. SPC's cross axis ball joints feature highly polished electroless nickel plated balls, corrosion and wear resistant moly impregnated nylon races, and dust boots to keep contaminants out & ensure long life. xAxis Joints come pre-greased and are designed to be maintenance free. This kit includes four (4) xAxis joints and press tool adapters to service a complete rear end. Use press tool #40940 or similar. Just need to replace one bushing? Order SPC part number 15645.
This Part Fits:
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 1999,2001,2003-2004 | Ford | Mustang | SVT Cobra |
| 2003 | Ford | Mustang | SVT Cobra 10th Anniversary |
| 2000 | Ford | Mustang | SVT Cobra R |
- LTL:
- N
- MPN:
- 72062
- Proposition 65:
- Y
- Special Order:
- N
- Clearance Item:
- N
PRODUCT REVIEWS (0)
Overall Rankings
Have you tried this product?
WRITE A REVIEWNo reviews for this product yet. Be the first to write a review!
Write a Review
SPC Performance
SPC Performance Cobra IRS XAXIS Joint Set (4) - 72062
SPC Performance Cobra IRS XAXIS Joint Set (4) - 72062 FAQ
It is listed for: 2003-2004 Ford Mustang; 2001 Ford Mustang; 1999 Ford Mustang and more (see the full list above). Pick your vehicle on this page to check your exact year and trim.
The maker's installation guide is on this page — see Installation guide under the part details for the step-by-step and the torque figures. Work on level ground with the car properly supported, and torque every fastener to the maker's figure. If the job is beyond your tools, any shop that does this kind of work can fit it.
Polyurethane keeps the suspension geometry tighter and lasts longer, but can add a little noise and firmness; rubber is quieter and softer.
Most bushings need a press or a bushing tool to get the old ones out; the new ones usually push in by hand or with a small press.
Polyurethane bushings must be greased on install with the grease supplied, or they squeak. Rubber bushings go in dry.
Yes, when the bushings locate a control arm or subframe. Check it after the install.
Not when they are greased properly and the sleeves are the right size. A squeak later on means they need grease.
Yes — monthly options show right under the Add to Cart button. Affirm, Klarna, PayPal Pay Later and Snap Finance are offered at checkout, and checking what you qualify for does not affect your credit score.
Install and care: bushings
Before you start
- Arrange a press or bushing tool for the old bushings.
- Keep the grease the maker supplies for polyurethane bushings.
Do
- Grease polyurethane bushings on every surface that touches metal.
- Torque the bolts with the car at ride height.
Don't
- Don't hammer a bushing in; press it.
- Don't skip the grease on polyurethane bushings.