RAVETTI

RAVETTI wheels: one house style, eighteen ways to run it

RAVETTI wheels are a monoblock cast line built around clean, road-going profiles rather than gimmicks. Every model in the catalog is a one-piece casting, and the range runs the whole numbering sequence from the M1 up to the M18. What ties them together is a consistent look: precise spoke work, tidy machined faces, and dark finishes that suit the daily-driven sedans, coupes, SUVs and trucks people actually put them on. What separates them is spoke count, lip treatment and how loud each face reads.

ThreePiece carries the line deep, with hundreds of SKUs live across sizes and finishes. You can walk the whole range on the RAVETTI collection page, but this page is about the wheels themselves - what each model is and how it differs from its siblings.

The RAVETTI lineup, model by model

Everything below is monoblock, so the differences are in the face design, the diameters offered and the finish menu. Prices noted are example starting points for a common spec.

The mainstream mesh and split-spoke models

  • M1 - a 20 and 22-inch split-spoke in four finishes, including Black and Milled, Black Brushed, Full Black and Silver Machined. A sample M1 20x8.5 in Full Black runs $263.
  • M5 - close in spirit to the M1 with the same four-finish spread, offered in 20 and 22. A workhorse face that reads clean in either machined or blacked-out trim.
  • M6 - notable for its Black with Pinstripe finish alongside Black Machined and Chrome, giving the face an accented outer edge without going to a separate lip.
  • M7 - a broad-finish model with Black Machined, Full Gloss Black, Satin Black Machined and Silver Brushed, and one of the wider bolt-pattern spreads in the family.

The blacked-out 20-inch trio

  • M10 - a 20-only model that keeps Chrome on the menu next to Full Gloss Black and machined options. Sample spec lands at $276.
  • M11 - pared back to three finishes centered on Satin Black Machined and Full Gloss Black, for buyers who want a tighter, darker look.
  • M12 - the satin-forward sibling, with Full Satin Black and Black and Milled. The satin base separates it visually from the glossier M11.

The smaller-diameter and compact-fitment faces

  • M8 - available in 18 and 20, Black Machined or Full Satin Black. A simpler face that suits smaller diameters.
  • M9 - the widest fitment reach in the line, offered down to 17 inches and in a 4x100 pattern as a fact of the model. Black Machined and Silver Machined only.
  • M13 - an 18 and 20-inch face in Full Gloss Black and Satin Black Machined, and one of the more affordable entries at $202 for the sample 18-inch.
  • M18 - the color-accent model, with Black and Blue Milled and Black and Red Milled alongside the standard black options, in 17 and 18-inch sizes.

The stainless-lip models

  • M14 - built with a stainless lip, offered as Black and Milled Stainless Lip or Silver Brushed Stainless Lip. The lip lifts the price to $334 for the sample and gives it a deeper, stepped look.
  • M15 - the M14's companion, with Gloss Black Stainless Lip and Silver Brushed Stainless Lip. Same lip concept, different face.

The rest of the range

  • M16 - a four-finish 20 and 22-inch model spanning Black, Gloss Black, Satin Black Machined and Silver Brushed.
  • M17 - Black and Milled, Gloss Black and Silver and Brushed, with the sample Gloss Black at $309.
  • M2 and M4 - the chrome-only pair, each a 20-inch offered in Chrome at $415. If you want a full-chrome RAVETTI, these are it.
  • M3 - the big-diameter and truck-oriented model, available in 22, 24 and 26 inches and in 6-lug patterns as a fact of the model. Finishes include Black and Milled, Black Machined, Chrome and Silver Machined.

How RAVETTI wheels are built and finished

Every RAVETTI in this catalog is a monoblock - a single cast piece, not a bolt-together multi-piece. That keeps the wheel simple and the price accessible while still giving room for machined faces and, on the M14 and M15, a stainless lip. The finish menu across the line is deliberately dark: variations of gloss black, satin black, black machined and black and milled dominate, with brushed and silver-machined options for a lighter face, Chrome on the M2, M3, M4, M6 and M10, and milled color accents on the M18.

Price and who RAVETTI is for

RAVETTI sits in the accessible aftermarket tier. Wheels here start around $184 for the smaller-diameter M9 and M18 and climb into the mid-$400s for the chrome and larger builds. If you want a clean, blacked-out or lightly machined look on a street car, SUV or truck without paying multi-piece money, this is the range to shop. See the whole catalog on the RAVETTI hub or browse the latest arrivals under new wheels.

Buying RAVETTI from ThreePiece

ThreePiece is an authorized RAVETTI dealer, so every wheel is new, warrantied and shipped with free shipping on all orders. We offer mounted and balanced packages if you want wheels and tires ready to bolt on, and financing through Affirm and Katapult, as low as 0% APR. Need to confirm the right size and offset for your vehicle? That's handled on our fitment tools and by our team - use the fitment calculator, call our specialists at 813-535-5801 through the contact page, or check the FAQ for shipping and ordering details.

RAVETTI wheels: one house style, eighteen ways to run it

RAVETTI wheels are a monoblock cast line built around clean, road-going profiles rather than gimmicks. Every model in the catalog is a one-piece casting, and the range runs the whole numbering sequence from the M1 up to the M18. What ties them together is a consistent look: precise spoke work, tidy machined faces, and dark finishes that suit the daily-driven sedans, coupes, SUVs and trucks people actually put them on. What separates them is spoke count, lip treatment and how loud each face reads.

ThreePiece carries the line deep, with hundreds of SKUs live across sizes and finishes. You can walk the whole range on the RAVETTI collection page, but this page is about the wheels themselves - what each model is and how it differs from its siblings.

The RAVETTI lineup, model by model

Everything below is monoblock, so the differences are in the face design, the diameters offered and the finish menu. Prices noted are example starting points for a common spec.

The mainstream mesh and split-spoke models

  • M1 - a 20 and 22-inch split-spoke in four finishes, including Black and Milled, Black Brushed, Full Black and Silver Machined. A sample M1 20x8.5 in Full Black runs $263.
  • M5 - close in spirit to the M1 with the same four-finish spread, offered in 20 and 22. A workhorse face that reads clean in either machined or blacked-out trim.
  • M6 - notable for its Black with Pinstripe finish alongside Black Machined and Chrome, giving the face an accented outer edge without going to a separate lip.
  • M7 - a broad-finish model with Black Machined, Full Gloss Black, Satin Black Machined and Silver Brushed, and one of the wider bolt-pattern spreads in the family.

The blacked-out 20-inch trio

  • M10 - a 20-only model that keeps Chrome on the menu next to Full Gloss Black and machined options. Sample spec lands at $276.
  • M11 - pared back to three finishes centered on Satin Black Machined and Full Gloss Black, for buyers who want a tighter, darker look.
  • M12 - the satin-forward sibling, with Full Satin Black and Black and Milled. The satin base separates it visually from the glossier M11.

The smaller-diameter and compact-fitment faces

  • M8 - available in 18 and 20, Black Machined or Full Satin Black. A simpler face that suits smaller diameters.
  • M9 - the widest fitment reach in the line, offered down to 17 inches and in a 4x100 pattern as a fact of the model. Black Machined and Silver Machined only.
  • M13 - an 18 and 20-inch face in Full Gloss Black and Satin Black Machined, and one of the more affordable entries at $202 for the sample 18-inch.
  • M18 - the color-accent model, with Black and Blue Milled and Black and Red Milled alongside the standard black options, in 17 and 18-inch sizes.

The stainless-lip models

  • M14 - built with a stainless lip, offered as Black and Milled Stainless Lip or Silver Brushed Stainless Lip. The lip lifts the price to $334 for the sample and gives it a deeper, stepped look.
  • M15 - the M14's companion, with Gloss Black Stainless Lip and Silver Brushed Stainless Lip. Same lip concept, different face.

The rest of the range

  • M16 - a four-finish 20 and 22-inch model spanning Black, Gloss Black, Satin Black Machined and Silver Brushed.
  • M17 - Black and Milled, Gloss Black and Silver and Brushed, with the sample Gloss Black at $309.
  • M2 and M4 - the chrome-only pair, each a 20-inch offered in Chrome at $415. If you want a full-chrome RAVETTI, these are it.
  • M3 - the big-diameter and truck-oriented model, available in 22, 24 and 26 inches and in 6-lug patterns as a fact of the model. Finishes include Black and Milled, Black Machined, Chrome and Silver Machined.

How RAVETTI wheels are built and finished

Every RAVETTI in this catalog is a monoblock - a single cast piece, not a bolt-together multi-piece. That keeps the wheel simple and the price accessible while still giving room for machined faces and, on the M14 and M15, a stainless lip. The finish menu across the line is deliberately dark: variations of gloss black, satin black, black machined and black and milled dominate, with brushed and silver-machined options for a lighter face, Chrome on the M2, M3, M4, M6 and M10, and milled color accents on the M18.

Price and who RAVETTI is for

RAVETTI sits in the accessible aftermarket tier. Wheels here start around $184 for the smaller-diameter M9 and M18 and climb into the mid-$400s for the chrome and larger builds. If you want a clean, blacked-out or lightly machined look on a street car, SUV or truck without paying multi-piece money, this is the range to shop. See the whole catalog on the RAVETTI hub or browse the latest arrivals under new wheels.

Buying RAVETTI from ThreePiece

ThreePiece is an authorized RAVETTI dealer, so every wheel is new, warrantied and shipped with free shipping on all orders. We offer mounted and balanced packages if you want wheels and tires ready to bolt on, and financing through Affirm and Katapult, as low as 0% APR. Need to confirm the right size and offset for your vehicle? That's handled on our fitment tools and by our team - use the fitment calculator, call our specialists at 813-535-5801 through the contact page, or check the FAQ for shipping and ordering details.