Throttle Cables

Throttle Cables: the pull that connects your wrist to the carb or throttle body

A throttle cable is the mechanical link between the twist grip and the throttle at the engine. Roll on and the cable pulls the throttle open; the return side (or idle side, on push-pull setups) closes it back down. When a cable frays inside its housing, kinks, or the sheath swells, you get sticky throttle, slow return, or a grip that binds mid-corner. Replacing throttle cables is a routine maintenance job that restores clean, predictable throttle action, and it's also where you buy a longer cable when you fit taller bars.

What we stock

There are 16 throttle cables in stock here, spanning idle, throttle, and push-pull applications. Prices currently run from $36 to $199 - that's the live range for what's on the shelf, not a standing offer. Two brands cover the range: Bikers Choice, which accounts for most of the listings, and All Balls Racing. Every product has fitment data attached.

Coverage centers on Harley-Davidson and Honda, across model years from 1974 to 2017. Named Harley models include the Dyna, FLHR, FLHT, FLHS, Softail, XLH, FX, FLH, FLT, FXST and FXR. On the Honda side, the All Balls Racing 04-13 Honda CRF100F throttle cable at $35.58 is the entry point and the least expensive listing on the page.

How to choose

Start with function. If your bike runs a push-pull setup you need both the throttle and the idle (return) cable - the Bikers Choice 02-07 FLHR armor coat idle cable is a +6" idle-side example at $198.71, sitting at the top of the range.

Next, decide length. Stock-length cables replace worn factory cables one-for-one, like the Bikers Choice 90-95 FLHT/FLHS black vinyl throttle cable that lists an OE reference number. Oversize lengths (the +6" options) exist so a longer cable clears taller or pulled-back bars without pulling tight at full lock. If you've changed your handlebars, measure before you order - a too-short cable can hold the throttle partly open at steering extremes.

What else you need with it

Throttle cables sit alongside the other hand-control and drivetrain wear parts. If you're in there refreshing controls, look at Clutch Levers and the broader Clutch Components and Clutch Rebuild Kits ranges. For final-drive service, we also stock Sprockets, Chain Components and Shift Components. Browse everything from the Drivetrain section.

Fitment and ordering

Because a cable has to match model, year and bar height, confirm your application before buying. Call our fitment line at 813-535-5801 or reach us through contact us if you're unsure which length you need. All orders ship free, and Affirm and Katapult financing is available through our financing options.

Throttle Cables: the pull that connects your wrist to the carb or throttle body

A throttle cable is the mechanical link between the twist grip and the throttle at the engine. Roll on and the cable pulls the throttle open; the return side (or idle side, on push-pull setups) closes it back down. When a cable frays inside its housing, kinks, or the sheath swells, you get sticky throttle, slow return, or a grip that binds mid-corner. Replacing throttle cables is a routine maintenance job that restores clean, predictable throttle action, and it's also where you buy a longer cable when you fit taller bars.

What we stock

There are 16 throttle cables in stock here, spanning idle, throttle, and push-pull applications. Prices currently run from $36 to $199 - that's the live range for what's on the shelf, not a standing offer. Two brands cover the range: Bikers Choice, which accounts for most of the listings, and All Balls Racing. Every product has fitment data attached.

Coverage centers on Harley-Davidson and Honda, across model years from 1974 to 2017. Named Harley models include the Dyna, FLHR, FLHT, FLHS, Softail, XLH, FX, FLH, FLT, FXST and FXR. On the Honda side, the All Balls Racing 04-13 Honda CRF100F throttle cable at $35.58 is the entry point and the least expensive listing on the page.

How to choose

Start with function. If your bike runs a push-pull setup you need both the throttle and the idle (return) cable - the Bikers Choice 02-07 FLHR armor coat idle cable is a +6" idle-side example at $198.71, sitting at the top of the range.

Next, decide length. Stock-length cables replace worn factory cables one-for-one, like the Bikers Choice 90-95 FLHT/FLHS black vinyl throttle cable that lists an OE reference number. Oversize lengths (the +6" options) exist so a longer cable clears taller or pulled-back bars without pulling tight at full lock. If you've changed your handlebars, measure before you order - a too-short cable can hold the throttle partly open at steering extremes.

What else you need with it

Throttle cables sit alongside the other hand-control and drivetrain wear parts. If you're in there refreshing controls, look at Clutch Levers and the broader Clutch Components and Clutch Rebuild Kits ranges. For final-drive service, we also stock Sprockets, Chain Components and Shift Components. Browse everything from the Drivetrain section.

Fitment and ordering

Because a cable has to match model, year and bar height, confirm your application before buying. Call our fitment line at 813-535-5801 or reach us through contact us if you're unsure which length you need. All orders ship free, and Affirm and Katapult financing is available through our financing options.