QuadBoss Double Row Led 32in - 568916
This wheel on real customer builds
See this part on video
Made by our team · tap a video to play it
📧 Get Fitment Help
Verify parts fit & get product recommendations
- UPC:
- 887337304175
- Availability:
- Regularly stocked product
Universal fit — no vehicle restriction.
- Part number
- QBS568916
- Manufacturer part number
- 568916
- UPC
- 887337304175
- Brand
- QuadBoss
- Part type
- Light Strip LED
- Special order
- Yes — ordered in for you; allow extra time
- Box size:
- 5.50 × 5.40 × 33.20 (in)
Complete the job
Read before you buy
The QuadBoss Double Row LED light bar, part 568916, measures 32 inches and is listed as a universal fit. It is a double row LED bar from QuadBoss, aimed at trucks, Jeeps and UTVs.
LED light bars throw a wide, dense wall of light well past what factory headlights reach, which helps when the pavement runs out. You can mount one to a roof line, bumper or A-pillar to light the ditches and the trail ahead so you can keep a sensible pace after dark.
Wiring is straightforward: a switched circuit, a relay, a fuse and a bracket that puts the bar where it earns its keep. Because this is universal, check the mounting points on your vehicle first, and call us if you need help planning it.
- LTL:
- N
- MPN:
- 568916
- Proposition 65:
- N
- Special Order:
- Y
- Clearance Item:
- N
PRODUCT REVIEWS (0)
Overall Rankings
Have you tried this product?
WRITE A REVIEWNo reviews for this product yet. Be the first to write a review!
Write a Review
QuadBoss
QuadBoss Double Row Led 32in - 568916
QuadBoss Double Row Led 32in - 568916 FAQ
This is a universal part: it is not tied to one vehicle. Check the Part details and the maker's guide for the sizes it is made for.
Most direct-fit lights plug into the factory connector. Light bars and auxiliary lights need a wiring harness and switch, included when the Part details say so.
Cars that check the bulb load can flag an LED; the maker says when a resistor or adapter is required.
DOT-marked headlights and tail lights are made for road use. Off-road light bars are for off-road use only, as the maker's listing states.
Yes. Aim headlights after installing them so they light the road without dazzling other drivers.
Sealed housings resist water; the Part details list the rating when the maker states one.
Yes — monthly options show right under the Add to Cart button. Affirm, Klarna, PayPal Pay Later and Snap Finance are offered at checkout, and checking what you qualify for does not affect your credit score.
It measures 32 inches and has a double row of LEDs. It is part 568916 from QuadBoss.
It is listed as universal, so you will plan your own mounting points and bracket. It suits trucks, Jeeps and UTVs.
It throws a wide, dense wall of light well past factory headlight reach. That helps light ditches and the trail ahead after dark.
Install and care: led light bars
Before you start
- Disconnect the battery before unplugging the factory lights.
- Check the maker's note on resistors or adapters for your car.
Do
- Aim the headlights after fitting them.
- Route the harness away from heat and moving parts, and seal the connectors.
Don't
- Don't use off-road lights on public roads.
- Don't leave a connector unsealed where water can reach it.
Price Match Guarantee
Free Shipping
IN STOCK (71 units)