QuadBoss Double Row Led 22in - 568915
This wheel on real customer builds
See this part on video
Made by our team · tap a video to play it
📧 Get Fitment Help
Verify parts fit & get product recommendations
- UPC:
- 887337304168
- Availability:
- Regularly stocked product
Universal fit — no vehicle restriction.
- Part number
- QBS568915
- Manufacturer part number
- 568915
- UPC
- 887337304168
- Brand
- QuadBoss
- Part type
- Light Strip LED
- Special order
- Yes — ordered in for you; allow extra time
- Box size:
- 5.80 × 5.50 × 23.90 (in)
Complete the job
Read before you buy
The QuadBoss double row LED light bar, 22 inches long, part number 568915, is a universal-fit light bar from QuadBoss. It is listed as a LED light strip in our LED Light Bars section.
LED light bars put a wide, dense pattern of light well beyond what factory headlights reach, which helps when the pavement runs out. Mounted to a roof line, bumper or A-pillar, a bar lights the ditches and the trail ahead, and it suits a truck, Jeep or side-by-side.
Because it is universal, you will need to source brackets and wiring that suit your mounting spot. Wiring is usually a switched circuit, a relay and a fuse. If you want help planning the install, call us.
- LTL:
- N
- MPN:
- 568915
- Proposition 65:
- N
- Special Order:
- Y
- Clearance Item:
- N
PRODUCT REVIEWS (0)
Overall Rankings
Have you tried this product?
WRITE A REVIEWNo reviews for this product yet. Be the first to write a review!
Write a Review
QuadBoss
QuadBoss Double Row Led 22in - 568915
QuadBoss Double Row Led 22in - 568915 FAQ
This is a universal part: it is not tied to one vehicle. Check the Part details and the maker's guide for the sizes it is made for.
Most direct-fit lights plug into the factory connector. Light bars and auxiliary lights need a wiring harness and switch, included when the Part details say so.
Cars that check the bulb load can flag an LED; the maker says when a resistor or adapter is required.
DOT-marked headlights and tail lights are made for road use. Off-road light bars are for off-road use only, as the maker's listing states.
Yes. Aim headlights after installing them so they light the road without dazzling other drivers.
Sealed housings resist water; the Part details list the rating when the maker states one.
Yes — monthly options show right under the Add to Cart button. Affirm, Klarna, PayPal Pay Later and Snap Finance are offered at checkout, and checking what you qualify for does not affect your credit score.
It puts a wide, dense pattern of light well beyond what factory headlights reach, which helps when the pavement runs out.
It is a universal bar, so it can go on a roof line, bumper or A-pillar of a truck, Jeep or side-by-side. You supply brackets that suit your spot.
Wiring is usually a switched circuit, a relay and a fuse. Because the bar is universal, you will also need to source your own wiring and brackets.
Install and care: led light bars
Before you start
- Disconnect the battery before unplugging the factory lights.
- Check the maker's note on resistors or adapters for your car.
Do
- Aim the headlights after fitting them.
- Route the harness away from heat and moving parts, and seal the connectors.
Don't
- Don't use off-road lights on public roads.
- Don't leave a connector unsealed where water can reach it.
Price Match Guarantee
Free Shipping
IN STOCK (129 units)