K&N 09-21 Dodge Ram 1500 V8 5.7L Performance Intake - 30-1561
This wheel on real customer builds
See this part on video
Made by our team · tap a video to play it
📧 Get Fitment Help
Verify parts fit & get product recommendations
- UPC:
- 024844400710
- Availability:
- Discontinued
K&N Engineering has stopped making this part, so it can no longer be ordered.
Need help picking? Call 813-535-5801 or email [email protected].
- 2009-2010 Dodge Ram 1500Laramie, SLT, ST, Sport, TRX, TRX4
- Part number
- KNN30-1561
- Manufacturer part number
- 30-1561
- UPC
- 024844400710
- Brand
- K&N Engineering
- Box size:
- 24.10 × 13.60 × 24.50 (in)
Complete the job
Read before you buy
PRODUCT REVIEWS (0)
Overall Rankings
Have you tried this product?
WRITE A REVIEWNo reviews for this product yet. Be the first to write a review!
Write a Review
K&N Engineering
K&N 09-21 Dodge Ram 1500 V8 5.7L Performance Intake - 30-1561
K&N 09-21 Dodge Ram 1500 V8 5.7L Performance Intake - 30-1561 FAQ
It is listed for: 2009-2010 Dodge Ram 1500. Pick your vehicle on this page to check your exact year and trim.
Most intakes work with the stock tune. When an intake changes the sensor housing size, the maker says a tune is required.
Follow the maker's service interval. Dry filters are blown out or washed; oiled filters are washed and re-oiled with the maker's kit. Over-oiling can foul the airflow sensor.
Yes. Most intakes make the induction sound louder, especially at wide throttle.
Yes. An intake is usually a bolt-on job with hand tools; the maker's guide covers the clamps and the sensor move.
A full intake kit includes its filter; a replacement filter is sold on its own. See What's in the box above.
Install and care: cold air intake
Before you start
- Read the maker's guide for where the airflow sensor moves to.
- Have the clamps and hand tools the guide names within reach.
Do
- Seat every coupler fully and tighten the clamps evenly.
- Service the filter on the maker's interval and use the maker's cleaning kit.
Don't
- Don't over-oil an oiled filter; it fouls the airflow sensor.
- Don't run the engine with a coupler loose.