ICON 2014+ Ram 2500 Front Adjustable Track Bar Kit - 214214

ICON’s Adjustable Front Track Bar helps eliminate the notorious "Death Wobble" that big Ram pickups can experience when you lift them and/or put major miles on the clock. This Upgraded ICON Ram 2500/3500 adjustable track bar is great for centering the front axle allowing it to track perfectly under the truck versus. offset to the side. It is constructed of 1/4" wall 1 1/2" DOM tubing and is CNC bent for a precise OE-style fit. The weak OEM rubber bushing is eliminated and the use of our 1" captured uniball bearing on the driver side minimizes overall deflection while allowing just enough movement so steering wheel feedback is not present. We use a PTFE lined rod end on the passenger side which also reduces deflection and threads into our left/right adjuster that allows easy on-truck adjustability for the perfect front end alignment.

The ICON Vehicle Dynamics 2014-UP Ram 2500 4WD Adjustable Front Track Bar helps eliminate the notorious "Death Wobble" these trucks have when you begin to adjust the ride height. The Upgraded ICON Ram 2500 adjustable track bar is great for centering the front axle allowing it to track perfectly under the truck vs. offset to the side. This bar is constructed of 1/4" Wall 1 1/2" DOM Tubing and is CNC Bent for a precise OE style fit. The weak OEM rubber bushing is eliminated and our 1" captured uniball bearing on the driver side minimizes overall deflection while allowing just enough movement so steering wheel feedback is not present. We use a PTFE lined rod end on the passenger side which also reduces deflection and threads into our left/right adjuster that allows easy on truck adjustability for the perfect front end alignment.

This adjustable track bar helps eliminate the famed "Death Wobble" that big Ram pickups can experience when you lift them and/or put major miles on the clock. Upgraded mounting points minimize deflection providing more steering stability.

14-26 RAM 2500/13-26 RAM 3500 FRONT ADJUSTABLE TRACK BAR KIT

• Upgraded 1" uniball on the driver side and PTFE lined rod end on the passenger side produces minimal to no deflection
• Constructed with CNC machined and bent 1 1/2" x .250 wall 1026 seamless DOM tubing
• Easy install using OEM mounts and included application-specific hardware
• Allows for full suspension articulation without binding
• On-vehicle adjustable for precise track alignment