Price Match Guarantee 
Free Shipping
Out of stock
Flowmaster 2.5in. S-BEND 6 Pack Combo Offset - 15926
This wheel on real customer builds
See this part on video
Made by our team · tap a video to play it
📧 Get Fitment Help
Verify parts fit & get product recommendations
Flowmaster
SKU:
FLO15926
|
- UPC:
- 700042016631
$259.95
$292.95
(You save
$33.00
)
Other Flowmaster kits for this car
Fits these vehicles
Fitment not listed for this part yet — call or text 813-535-5801 and we will confirm it for your car.
Part details
- Part number
- FLO15926
- Manufacturer part number
- 15926
- UPC
- 700042016631
- Brand
- Flowmaster
- Part type
- Steel Tubing
- Special order
- Yes — ordered in for you; allow extra time
- Instructions
- Installation instructions (PDF)
- In the box
- (2) Each of 4.00-inch
- 6.00-inch
- 8.00-inch Offsets
Installation guide (from Flowmaster)
Hosted by Flowmaster. Follow the maker's instructions and torque specs.
- Box size:
- 14.90 × 9.80 × 50.00 (in)
Finance it — pay over time
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
Low monthly payments
Affirm, Klarna or PayPal Pay Later: see your exact plan at checkout. Checking won’t affect your credit score.
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
- Affirm
- Klarna
- PayPal Pay Later
- Snap Finance
📧 Get Fitment Help
Verify parts fit & get product recommendations
Complete the job
Read before you buy
-
-
Out of stock
-
Out of stock
-
Out of stock
Mandrel bent S-shape pipes developed to simplify the routing and fabrication of exhaust pipes from headers to muffler. Deep slip fit on single end of pipe(s). Available in various sizes.
Exhaust S-Bend Assortment - 2.50 in. Tubing Various Offsets - Set of 6
Flowmaster S-Bend Kit
- Includes (2) Each of 4.00-inch, 6.00-inch and 8.00-inch Offsets
- 2.50-inch Tubing Approximately 36-inches in Length
- Mandrel-bent 16 Gauge Aluminized Steel Tubing
- Great for Dual Exhaust System Fabrication
- Clearance Item:
- N
- LTL:
- N
- MPN:
- 15926
- Proposition 65:
- N
- Special Order:
- Y
PRODUCT REVIEWS (0)
Overall Rankings
Have you tried this product?
WRITE A REVIEWNo reviews for this product yet. Be the first to write a review!
Write a Review
Flowmaster
Flowmaster 2.5in. S-BEND 6 Pack Combo Offset - 15926
Flowmaster 2.5in. S-BEND 6 Pack Combo Offset - 15926 FAQ
- (2) Each of 4.00-inch
- 6.00-inch
- 8.00-inch Offsets
The maker's installation guide is on this page — see Installation guide under the part details for the step-by-step and the torque figures. Work on level ground with the car properly supported, and torque every fastener to the maker's figure. If the job is beyond your tools, any shop that does this kind of work can fit it.
What's in the box above lists what the maker includes when we have it, and the maker's guide names any tools or extra parts.
Many parts are bolt-on jobs with hand tools; the maker's guide on this page shows the steps and the torque figures. If it is beyond your tools, a shop can fit it.
Check the vehicle list above against your exact year and trim before ordering. If something is off, call or text us at 813-535-5801 and we will sort it out.
Yes — monthly options show right under the Add to Cart button. Affirm, Klarna, PayPal Pay Later and Snap Finance are offered at checkout, and checking what you qualify for does not affect your credit score.
Install and care: Steel Tubing
- Before you start, read the maker's guide on this page end to end and lay out every part against the What's in the box list.
- Do torque every fastener to the maker's figure with a torque wrench, and re-check it after the first drive.
- Don't force a part that does not line up: check the vehicle list on this page against your exact year and trim first.