LED Light Kits

LED Light Kits: Bolt-On Auxiliary Lighting With the Brackets and Wiring in the Box

LED light kits give you a complete auxiliary lighting install in one package - the lights, the vehicle-specific mounts, and in most cases the wiring loom or upfitter harness. That last part matters. Buying a bare pod means fabricating a bracket and sourcing a switched, fused wire; these kits skip that. You get pods sized for a bumper or mirror position, the hardware that puts them where the maker intended, and a loom you route to a switch. That's why people fit them: proper forward or accent lighting without cutting metal or building a harness from scratch.

What ThreePiece Stocks

There are 21 LED light kits in this category right now, spread across seven brands: Baja Designs (the largest group at eight kits), ARB, XKGLOW, plus single entries from Ford Racing, Hella, Diode Dynamics and ORACLE Lighting. Prices run from $108 to $1,142 - that's the current range for what is in stock, not a fixed promise. The high end is the Baja Designs JL/JT Rubicon LP6 bumper kit with upfitter and its LP4 sibling. Fitment data is listed on 6 of the kits, covering model years 2010 through 2024, with named vehicles including the Jeep Wrangler, Jeep Gladiator, Ford Maverick and Mercedes Sprinter.

How to Choose

The split here is between vehicle-specific bumper and mirror kits and universal accent kits. If you drive one of the covered platforms, a dedicated kit bolts to factory points - the Ford Racing 2021+ Bronco mirror-mounted Rigid kit mounts to the mirror stalks, no drilling. For forward driving light on a Jeep, the Baja Designs Rubicon kits pair pods with an upfitter harness so you use the factory switch bank.

Beam pattern is the other decision. ARB's Intensity SOLIS 36 comes as a dual flood kit with loom for spread and close-in work, or a one spot, one flood combo that adds distance to one side of the pair. If the goal is color and presence rather than road light, the XKGLOW multi-color ATV/motorcycle accent kit is pods and strips for underbody and accent use.

What Else You Need

These kits handle their own mounting, but they live alongside the rest of your build. For a bigger single bar instead of pods, see LED Light Bars. To replace the primary beams, look at Headlights, and finish the rear with Tail Lights and Turn Signals. Browse everything electrical under the broader Lighting group or the full Exterior section.

Fitment Help and Ordering

Before you buy a vehicle-specific kit, confirm it matches your year and model - fitment help is available by phone at 813-535-5801, or reach us through contact us. All orders ship free, and Affirm and Katapult financing is available at checkout.

LED Light Kits: Bolt-On Auxiliary Lighting With the Brackets and Wiring in the Box

LED light kits give you a complete auxiliary lighting install in one package - the lights, the vehicle-specific mounts, and in most cases the wiring loom or upfitter harness. That last part matters. Buying a bare pod means fabricating a bracket and sourcing a switched, fused wire; these kits skip that. You get pods sized for a bumper or mirror position, the hardware that puts them where the maker intended, and a loom you route to a switch. That's why people fit them: proper forward or accent lighting without cutting metal or building a harness from scratch.

What ThreePiece Stocks

There are 21 LED light kits in this category right now, spread across seven brands: Baja Designs (the largest group at eight kits), ARB, XKGLOW, plus single entries from Ford Racing, Hella, Diode Dynamics and ORACLE Lighting. Prices run from $108 to $1,142 - that's the current range for what is in stock, not a fixed promise. The high end is the Baja Designs JL/JT Rubicon LP6 bumper kit with upfitter and its LP4 sibling. Fitment data is listed on 6 of the kits, covering model years 2010 through 2024, with named vehicles including the Jeep Wrangler, Jeep Gladiator, Ford Maverick and Mercedes Sprinter.

How to Choose

The split here is between vehicle-specific bumper and mirror kits and universal accent kits. If you drive one of the covered platforms, a dedicated kit bolts to factory points - the Ford Racing 2021+ Bronco mirror-mounted Rigid kit mounts to the mirror stalks, no drilling. For forward driving light on a Jeep, the Baja Designs Rubicon kits pair pods with an upfitter harness so you use the factory switch bank.

Beam pattern is the other decision. ARB's Intensity SOLIS 36 comes as a dual flood kit with loom for spread and close-in work, or a one spot, one flood combo that adds distance to one side of the pair. If the goal is color and presence rather than road light, the XKGLOW multi-color ATV/motorcycle accent kit is pods and strips for underbody and accent use.

What Else You Need

These kits handle their own mounting, but they live alongside the rest of your build. For a bigger single bar instead of pods, see LED Light Bars. To replace the primary beams, look at Headlights, and finish the rear with Tail Lights and Turn Signals. Browse everything electrical under the broader Lighting group or the full Exterior section.

Fitment Help and Ordering

Before you buy a vehicle-specific kit, confirm it matches your year and model - fitment help is available by phone at 813-535-5801, or reach us through contact us. All orders ship free, and Affirm and Katapult financing is available at checkout.