Price Match Guarantee 
Free Shipping
Sale
Only 4 left in stock
EBC S2 Brake Pad and Rotor Kit - S2KF1967
This wheel on real customer builds
See this part on video
Made by our team · tap a video to play it
📧 Get Fitment Help
Verify parts fit & get product recommendations
EBC
SKU:
EBCS2KF1967
$459.81
$484.01
(You save
$24.20
)
Other EBC kits for this car
Fits these vehicles
- 2026 Toyota CorollaHybrid LE
- 2020-2023 Toyota CorollaHybrid LE
- 2026 Toyota CorollaHybrid SE
- 2023 Toyota CorollaHybrid SE
- 2026 Toyota CorollaHybrid XLE
- 2023 Toyota CorollaHybrid XLE
- 2020-2022 Toyota CorollaL
- 2020-2023 Toyota CorollaLE, SE
- 2021-2022 Toyota CorollaSE Apex
- 2020-2022 Toyota CorollaSE Nightshade, XLE
- 2020-2023 Toyota CorollaXSE
- 2021-2022 Toyota CorollaXSE Apex
- 2022 Toyota Corolla CrossL, LE, XLE
Part details
- Part number
- EBCS2KF1967
- Manufacturer part number
- S2KF1967
- Brand
- EBC
- Part type
- Brake Rotors - Slotted
- Prop 65
- ⚠️ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
- Special order
- Yes — ordered in for you; allow extra time
- Instructions
- Installation instructions (PDF)
- Rotor type
- Slotted
Installation guide (from EBC)
Hosted by EBC. Follow the maker's instructions and torque specs.
Finance it — pay over time
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
Low monthly payments
Affirm, Klarna or PayPal Pay Later: see your exact plan at checkout. Checking won’t affect your credit score.
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
- Affirm
- Klarna
- PayPal Pay Later
- Snap Finance
📧 Get Fitment Help
Verify parts fit & get product recommendations
Complete the job
Read before you buy
-
-
SaleOnly 1 left in stock
-
Only 2 left in stock
-
Only 3 left in stock
Save 15% over cost of buying separate parts with this quality pad and rotor kit which includes pads rotors and caliper lube. If you desire a modest brake improvement at speeds or higher heat and load on any sports compact or sedan this Kit will be your best choice.High efficiency EBC pads built with Aramid fiber,fully shimmed,slotted and chamfered and featuring the EBC patented Brake-in coating for fast pad seating after install. Matched with fine slot sport vented rotors for cooler brakes and lifetime perfect flat and parallel pad wear finished with Geomet anti rust coating.
S2 Kits Greenstuff 2000 and USR Rotors; Front; FMSI Pad No. D1184; Vented; 5 Bolt Holes; 275mm Dia.; 46.5mm Height; 22mm Thick; 55mm Center Hole Dia.;
S2 Kits Greenstuff 2000 and USR Rotors
55mm Center Hole Dia.
- Ideal For Spirited Driving And Fast Compacts Alike
- Direct Fit; No Changes Required Over Stock Set Up
- No Changes Required Over Stock Set Up
- Fine Slotted G3000 Sport Rotors
- 10;000 Mile No Hassle Warranty
- Improved Braking Over OE Pads
- 000 Mile No Hassle Warranty
- Sport Compact Upgrade Kit
- Geomet Anti Rust Coating
- Direct Fit
- 10
- Clearance Item:
- N
- LTL:
- N
- MPN:
- S2KF1967
- Proposition 65:
- Y
- Special Order:
- Y
PRODUCT REVIEWS (0)
Overall Rankings
Have you tried this product?
WRITE A REVIEWNo reviews for this product yet. Be the first to write a review!
Write a Review
EBC
EBC S2 Brake Pad and Rotor Kit - S2KF1967
EBC S2 Brake Pad and Rotor Kit - S2KF1967 FAQ
It is listed for: 2026 Toyota Corolla; 2020-2023 Toyota Corolla; 2026 Toyota Corolla and more (see the full list above). Pick your vehicle on this page to check your exact year and trim.
The maker's installation guide is on this page — see Installation guide under the part details for the step-by-step and the torque figures. Work on level ground with the car properly supported, and torque every fastener to the maker's figure. If the job is beyond your tools, any shop that does this kind of work can fit it.
Yes. A series of firm slowdowns from moderate speed, without coming to a stop, lays an even layer of pad material on the rotor. Follow the maker's bed-in steps.
New pads on worn or grooved rotors bed poorly and can squeal; if the rotors are worn or lipped, replace both.
Not for a pad or rotor change. Calipers or lines open the system, so it has to be bled, and fresh fluid is the normal choice then.
Larger calipers and rotors need wheel clearance. The Part details list the minimum wheel size when the maker states it, and the maker's clearance template settles any doubt.
Usually incomplete bed-in, missing shims or anti-squeal paste, or an aggressive compound. Bed them in and check the hardware first.
Pads and rotors are a common home job with jack stands, a torque wrench and the right sockets. Calipers and lines need bleeding, so a shop is the safer choice if you have not bled brakes before.
Yes — monthly options show right under the Add to Cart button. Affirm, Klarna, PayPal Pay Later and Snap Finance are offered at checkout, and checking what you qualify for does not affect your credit score.
Install and care: brake rotors
Before you start
- Read the maker's bed-in steps so you can do them right after the install.
- Check the rotors, hardware and fluid while the wheels are off.
Do
- Bed the pads and rotors in right away, following the maker's steps.
- Use the new hardware and shims the kit includes.
Don't
- Don't put new pads on worn, grooved or lipped rotors.
- Don't drive hard before the bed-in is done.