Bilstein B1 (Components) Replacement Bushing Kits - B4-KT1-Z333A01
This wheel on real customer builds
See this part on video
Made by our team · tap a video to play it
📧 Get Fitment Help
Verify parts fit & get product recommendations
- Availability:
- Regularly stocked product
Fitment not listed for this part yet — call or text 813-535-5801 and we will confirm it for your car.
- Part number
- BILB4-KT1-Z333A01
- Manufacturer part number
- B4-KT1-Z333A01
- Brand
- Bilstein
- Part type
- Shocks and Struts
- Box size:
- 3.80 × 1.30 × 4.00 (in)
Complete the job
Read before you buy
The Bilstein B1 (Components) Replacement Bushing Kit, part number B4-KT1-Z333A01, comes from Bilstein. It sits in the shocks and struts part family, and no vehicle fit list is attached to this listing.
Suspension bushings are the flexible joints between your control arms, sway bars, subframe and the rest of the chassis. Factory rubber goes soft, cracks and deflects under load, which shows up as vague steering, clunks and inconsistent alignment. Replacing them is a cost-effective way to make a tired car feel connected again, and it costs far less than new arms or coilovers.
The first decision is scope: a single worn joint needs a specific bushing, while a car with age across the board is better served by a kit. Pick your vehicle on the page to confirm fit.
- Clearance Item:
- N
- LTL:
- N
- MPN:
- B4-KT1-Z333A01
- Proposition 65:
- N
- Special Order:
- N
PRODUCT REVIEWS (0)
Overall Rankings
Have you tried this product?
WRITE A REVIEWNo reviews for this product yet. Be the first to write a review!
Write a Review
Bilstein
Bilstein B1 (Components) Replacement Bushing Kits - B4-KT1-Z333A01
Bilstein B1 (Components) Replacement Bushing Kits - B4-KT1-Z333A01 FAQ
Yes. Replace both fronts or both rears together so each axle damps evenly.
Struts that bolt to the knuckle set camber, so an alignment is wise after replacing them. Rear shocks that only bolt to the axle or arm usually do not change the alignment.
Bouncing after bumps, nose-dive under braking, uneven tire wear and fluid on the shock body are the usual signs.
Only when the listing says they are made for it. A stock-length shock on a lowered or lifted car runs near the end of its travel and wears early.
Check the top mounts and bump stops while the strut is out; worn ones are usually replaced at the same time.
Yes — monthly options show right under the Add to Cart button. Affirm, Klarna, PayPal Pay Later and Snap Finance are offered at checkout, and checking what you qualify for does not affect your credit score.
They are the flexible joints between control arms, sway bars and chassis. Worn rubber shows up as vague steering, clunks and inconsistent alignment.
A single worn joint needs a specific bushing. A car with age across the board is better served by a kit like this one.
It is a Bilstein B1 replacement bushing kit, listed in the shocks and struts part family.
Install and care: shocks and struts
Before you start
- Plan to do both sides of the axle in one go.
- Check the top mounts and bump stops, and have replacements ready if they are worn.
Do
- Replace both sides of an axle together.
- Torque the lower bolts with the car at ride height and re-check after the first drive.
Don't
- Don't reuse a worn top mount or bump stop.
- Don't fit a stock-length shock to a lowered or lifted car.
Price Match Guarantee
Free Shipping
IN STOCK (15 kits)