Belak Industries 5x112 wheels bring this drag-and-track-focused lineup to the 5x112 bolt pattern, with options spanning beadlock and non-beadlock designs in diameters from 17 to 20 inches. Every 5x112 fitment here is built as a three-piece wheel and offered in a Milled finish. The pattern is one of several Belak Industries carries, so 5x112 buyers get access to the brand's purpose-built motorsport profiles on a popular European bolt circle.
Shop 5x112 Belak Industries Wheels
Showing 36 in stock.
Shop all 5x112 Belak Industries wheels →
Why Belak Industries 5x112 wheels matter
Belak Industries is known for lightweight, motorsport-oriented wheels aimed at drag and track use, and the 5x112 pattern opens that engineering up to platforms that run this bolt circle. Choosing a wheel by exact bolt pattern, diameter, width, and offset is the most reliable way to land a correct setup, and the 5x112 selection here is filtered to that pattern specifically. Because these are three-piece wheels, the assembly pairs a center with outer components to hit aggressive widths and offsets. You can browse the wider range on the full Belak Industries lineup when you want to compare patterns side by side.
Which models and options
Several series carry 5x112. In the non-beadlock category, look at the Series 2 - Non-Beadlock Wheel, Series 3 - Non-Beadlock Wheel, and Series 4 - Non-Beadlock Wheel. For beadlock setups, the Series 3 - Single Beadlock Wheel and Series 4 - Single Beadlock Wheel both offer 5x112, alongside the shallow billet variants such as the Series 2 - Shallow Billet Single Beadlock Wheel and Series 3 - Shallow Billet Single Beadlock Wheel. Skinny-front and spacer-required profiles are covered by the Series 3 Wheel - Monoblock (Req Spacer) and Series 3 Wheel - Single Beadlock (Req Spacer). Every 5x112 wheel here is finished in Milled.
Fitment coverage
This page is filtered to the 5x112 bolt pattern, which is common on many European platforms. Within 5x112, diameters run 17, 18, and 20 inches, so 18-inch drag fitments and taller 20-inch street setups are both represented. A good starting point is the Series 2 Non-Beadlock 5x112 18x10 +7 or the Series 2 Shallow Billet Single Beadlock 5x112 18x8.5 +26. Need a different bolt circle? Belak Industries also carries 5x114.3, 5x120, 5x100, 4x100, and 6x135 fitments. You can also shop by size via the 17-inch and 18-inch pages, or step down to the smaller 13-inch and 15-inch ranges in other patterns.
How to choose
Start with your exact bolt pattern (5x112 here), then pick a diameter that suits your tire and brake clearance. Decide whether you want a beadlock for high-power, low-pressure drag use or a non-beadlock for street-friendly duty. Note that the (Req Spacer) profiles are intended to be run with a spacer, while shallow billet beadlocks give a tighter face for narrower applications. Always confirm width and offset against your fender and suspension before ordering, and compare a couple of candidates such as the Series 4 Wheel - Non-Beadlock against the beadlock options.
Frequently Asked Questions
What finish do the 5x112 wheels come in? Every Belak Industries wheel offered in 5x112 is finished in Milled.
What diameters are available in 5x112? The 5x112 pattern is offered in 17-, 18-, and 20-inch diameters depending on the model.
How are these wheels constructed? The 5x112 Belak Industries wheels are three-piece wheels, with beadlock, shallow billet beadlock, and non-beadlock profiles among the choices.