SuperPro Lower Control Arm Bushing Kit - KIT202K
This wheel on real customer builds
See this part on video
Made by our team · tap a video to play it
📧 Get Fitment Help
Verify parts fit & get product recommendations
- UPC:
- 9317745771258
Fitment not listed for this part yet — call or text 813-535-5801 and we will confirm it for your car.
- Part number
- SPRKIT202K
- Manufacturer part number
- KIT202K
- UPC
- 9317745771258
- Brand
- Superpro
- Part type
- Bushing Kits
- Prop 65
- ⚠️ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
- Special order
- Yes — ordered in for you; allow extra time
- Box size:
- 9.00 × 6.00 × 11.00 (in)
Complete the job
Read before you buy
Standard Replacement Lower Control Arm Bushes Camber Adjustable Upper Control Arm Bushes Steering Rack Mount Bushes This Kit is the ideal choice for bush replacement for repair or upgrade. SuperPro out performs the original O.E bushings in every location on the vehicle. Upgrade & Suspension Lift Fitting bigger, wider wheels and tires seriously impact the performance of the rubber bushings. Increasing the tire contact patch increases the amount of rubber in contact with the road; this in turn amplifies the drag and load imparted on the rubber bushings. This will cause instability under braking and dramatically reduce their service life. Raising a 4WD dramatically alter the performance of a rubber bushing. SuperPro bushings provide superior control and, in specific locations, work as a free pivoting bearing, regardless of ride height. Lifting a vehicle also lifts the center of gravity, in turn inducing greater forces on the suspension, requiring a more resilient suspension bushing in every location to control the attitude of the vehicle. Repair Rubber bushings deteriorate and induce undesirable characteristics into the handling. Worn bushings impart steering angles on the vehicle causing the vehicle to wander all over the road and make the vehicle subject severe directional changes under braking. SuperPro bushings are more durable and give more positive arm location than an O.E rubber bushing, resulting in a vehicle that gives the driver that & New Car Feel for the life of the car.
Control Arm Upper Lower & Steering Rack Bush Kit
- Dial in your perfect alignment with an adjustable design that lets you fine-tune camber settings for maximum tire contact and precision control
- Heavy-duty construction built to handle the toughest conditions while maintaining peak performance over the long haul
- Lowers your vehicle's center of gravity for improved handling dynamics and a sportier, more purposeful look
- Unlock noticeably improved handling and cornering grip that transforms your driving experience
- Locks in your alignment settings while delivering noticeably enhanced steering response
- Clearance Item:
- N
- LTL:
- N
- MPN:
- KIT202K
- Proposition 65:
- Y
- Special Order:
- Y
PRODUCT REVIEWS (0)
Overall Rankings
Have you tried this product?
WRITE A REVIEWNo reviews for this product yet. Be the first to write a review!
Write a Review
Superpro
SuperPro Lower Control Arm Bushing Kit - KIT202K
SuperPro Lower Control Arm Bushing Kit - KIT202K FAQ
Polyurethane keeps the suspension geometry tighter and lasts longer, but can add a little noise and firmness; rubber is quieter and softer.
Most bushings need a press or a bushing tool to get the old ones out; the new ones usually push in by hand or with a small press.
Polyurethane bushings must be greased on install with the grease supplied, or they squeak. Rubber bushings go in dry.
Yes, when the bushings locate a control arm or subframe. Check it after the install.
Not when they are greased properly and the sleeves are the right size. A squeak later on means they need grease.
Yes — monthly options show right under the Add to Cart button. Affirm, Klarna, PayPal Pay Later and Snap Finance are offered at checkout, and checking what you qualify for does not affect your credit score.
Install and care: bushings
Before you start
- Arrange a press or bushing tool for the old bushings.
- Keep the grease the maker supplies for polyurethane bushings.
Do
- Grease polyurethane bushings on every surface that touches metal.
- Torque the bolts with the car at ride height.
Don't
- Don't hammer a bushing in; press it.
- Don't skip the grease on polyurethane bushings.
Price Match Guarantee
Free Shipping