SPC Performance Isuzu/GM Adj Arms (Pair) - 25620

Isuzu D-Max and second-generation Chevy Colorado trucks run out of factory camber and caster adjustment when they are lifted. SPC's heavy duty cast replacement arms provide 0deg to +4deg caster change and +-3deg camber change. SPC's patented truck arms offer increased droop travel and free pivoting bushings in an easy to align remove and replace arm. Featuring our long life maintainable ball joint and SpecRide bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. These remove and replace arms are available in pairs for lifted and off-road applications. Get more droop travel: SPC's arm has improved clearance ot get around the spring bucket when the arm droops, eliminating arm to frame contact on lifted trucks. The maintainable ball joint has an oversized ball and allows more than 80deg of articulation to ensure it never binds. SpecRide bushings have free pivot to eliminate any chance of bushing failure seen on many high travel suspensions. Get your drivability back: When you lift your truck you affect caster and camber. SPC's arms have +1deg of caster built into them. Using its patented ball joint design the arm will get you 0deg to +4deg of caster and +-2deg of camber. Get your tire where you wantit in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming. California Residents WARNING

Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC's adjustable front upper control arms. Featuring a new maintenance free ball joint and SpecRide(TM) bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC's integrated tubular and cast steel designs provide the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs. Get more droop travel: SPC's arm has improved clearance to get around the spring bucket. With 80 of articulation in the upgraded ball joint and free pivoting bushings, SPC's arm gives you maximum droop travel. Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC's arms have +1 of caster built into them. Using its patented ball joint design the arm will get you 0 to +4 of caster and 3 of camber, so you can put your alignment angles back to specification. Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming. Note: This arm set is for international fitments and does not fit North American models. In the Asian region, this arm set fits Holden: Colorado/Rodeo 2011-2018 (Asian Regions), Isuzu: D-Max 2011-2018 (Asian and European). All fitments are for both 4WD and RWD models.

ISUZU/GM ADJ ARMS (PAIR)