Price Match Guarantee 
Free Shipping
Out of stock
SPC Performance 9in. DISC SILENCER - 00095
This wheel on real customer builds
See this part on video
Made by our team · tap a video to play it
📧 Get Fitment Help
Verify parts fit & get product recommendations
SPC Performance
SKU:
SPC00095
|
- UPC:
- 082642000952
$66.34
Other SPC Performance kits for this car
Fits these vehicles
Fitment not listed for this part yet — call or text 813-535-5801 and we will confirm it for your car.
Part details
- Part number
- SPC00095
- Manufacturer part number
- 00095
- UPC
- 082642000952
- Brand
- SPC Performance
- Part type
- Spring Insulators
- Prop 65
- ⚠️ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
- Special order
- Yes — ordered in for you; allow extra time
- Instructions
- Installation instructions (PDF)
Installation guide (from SPC Performance)
Hosted by SPC Performance. Follow the maker's instructions and torque specs.
- Box size:
- 6.00 × 0.50 × 9.00 (in)
Finance it — pay over time
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
Low monthly payments
Affirm, Klarna or PayPal Pay Later: see your exact plan at checkout. Checking won’t affect your credit score.
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
- Affirm
- Klarna
- PayPal Pay Later
- Snap Finance
📧 Get Fitment Help
Verify parts fit & get product recommendations
Complete the job
Read before you buy
-
-
Out of stock
-
Out of stock
-
Out of stock
Used on any brake lathe and with any ventilated rotor, this silencer will suppress vibration and noise. This segmented silencer is made of the finest latex rubber tubing with four (4) steel tubes to quiet chatter. Recommended for all disc brake rotor resurfacing machines. DIMENSIONS: 9" diameter
Used on any brake lathe and with any ventilated rotor, they suppress vibration and noise. Segmented silencer is made of the finest latex rubber tubing with four (4) steel tubes to quiet chatter. Recommended for all disc resurfacing machines. DIMENSIONS:9" diameter California Residents WARNING
Used on any brake lathe and with any ventilated rotor, they suppress vibration and noise. Segmented silencer is made of the finest latex rubber tubing with four (4) steel tubes to quiet chatter. Recommended for all disc resurfacing machines. DIMENSIONS:9" diameter
9" SEGMENTED DISC SILENCER
- Segmented silencer made of latex rubber tubing with four (4) steel tubes
- For use on any brake lathe and perfect for a ventilated rotor
- For use on any brake lathe and with a ventilated rotor
- Suppresses vibration, noise and chatter
- Suppresses vibration noise and chatter
- Dimensions: 9" diameter
- Clearance Item:
- N
- LTL:
- N
- MPN:
- 00095
- Proposition 65:
- Y
- Special Order:
- Y
PRODUCT REVIEWS (0)
Overall Rankings
Have you tried this product?
WRITE A REVIEWNo reviews for this product yet. Be the first to write a review!
Write a Review
SPC Performance
SPC Performance 9in. DISC SILENCER - 00095
SPC Performance 9in. DISC SILENCER - 00095 FAQ
The maker's installation guide is on this page — see Installation guide under the part details for the step-by-step and the torque figures. Work on level ground with the car properly supported, and torque every fastener to the maker's figure. If the job is beyond your tools, any shop that does this kind of work can fit it.
Polyurethane keeps the suspension geometry tighter and lasts longer, but can add a little noise and firmness; rubber is quieter and softer.
Most bushings need a press or a bushing tool to get the old ones out; the new ones usually push in by hand or with a small press.
Polyurethane bushings must be greased on install with the grease supplied, or they squeak. Rubber bushings go in dry.
Yes, when the bushings locate a control arm or subframe. Check it after the install.
Not when they are greased properly and the sleeves are the right size. A squeak later on means they need grease.
Yes — monthly options show right under the Add to Cart button. Affirm, Klarna, PayPal Pay Later and Snap Finance are offered at checkout, and checking what you qualify for does not affect your credit score.
Install and care: bushings
Before you start
- Arrange a press or bushing tool for the old bushings.
- Keep the grease the maker supplies for polyurethane bushings.
Do
- Grease polyurethane bushings on every surface that touches metal.
- Torque the bolts with the car at ride height.
Don't
- Don't hammer a bushing in; press it.
- Don't skip the grease on polyurethane bushings.