Price Match Guarantee 
Free Shipping
LOW STOCK (4 kits)
Write a Review
Write a Review
Skyjacker
Skyjacker 1987-1987 Chevrolet R10 Pickup Hydro Shock Absorber - H7011
Skyjacker 1987-1987 Chevrolet R10 Pickup Hydro Shock Absorber - H7011
This wheel on real customer builds
See this part on video
Made by our team · tap a video to play it
📧 Get Fitment Help
Verify parts fit & get product recommendations
Skyjacker
SKU:
SKYH7011
|
- UPC:
- 803696134574
- Availability:
- Regularly stocked product
$60.00
Other Skyjacker kits for this car
Fits these vehicles
- 1987 Chevrolet R10 Pickup
Part details
- Part number
- SKYH7011
- Manufacturer part number
- H7011
- UPC
- 803696134574
- Brand
- Skyjacker
- Part type
- Shocks and Struts
- Prop 65
- ⚠️ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
- Box size:
- 3.20 × 3.10 × 24.00 (in)
Finance it — pay over time
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
Low monthly payments
Affirm, Klarna or PayPal Pay Later: see your exact plan at checkout. Checking won’t affect your credit score.
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
- Affirm
- Klarna
- PayPal Pay Later
- Snap Finance
📧 Get Fitment Help
Verify parts fit & get product recommendations
Complete the job
Read before you buy
Skyjacker 1987-1987 Chevrolet R10 Pickup Hydro Shock Absorber - H7011
$60.00
- 5/8 in. Diameter Hardened And Double Chrome Rod
- Includes Red Boot 15 Other Colors Available
- Multi-Stage Velocity Sensitive Valving
- Red Polyurethane Bushings
- Limited Lifetime Warranty
- Twin Tube Construction
Skyjacker(R) Suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S., control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the ‘shock' of bumps and suspension loading is actually performed by the springs in the suspension. The shock's real job is controlling the energy stored in the springs.
- 5/8 in. Diameter Hardened And Double Chrome Rod
- Includes Red Boot 15 Other Colors Available
- Multi-Stage Velocity Sensitive Valving
- Red Polyurethane Bushings
- Limited Lifetime Warranty
- Twin Tube Construction
- LTL:
- N
- MPN:
- H7011
- Proposition 65:
- Y
- Special Order:
- N
- Clearance Item:
- N
PRODUCT REVIEWS (0)
Overall Rankings
Have you tried this product?
WRITE A REVIEWNo reviews for this product yet. Be the first to write a review!
Write a Review
Skyjacker
Skyjacker 1987-1987 Chevrolet R10 Pickup Hydro Shock Absorber - H7011
Skyjacker 1987-1987 Chevrolet R10 Pickup Hydro Shock Absorber - H7011 FAQ
It is listed for: 1987 Chevrolet R10 Pickup. Pick your vehicle on this page to check your exact year and trim.
Yes. Replace both fronts or both rears together so each axle damps evenly.
Struts that bolt to the knuckle set camber, so an alignment is wise after replacing them. Rear shocks that only bolt to the axle or arm usually do not change the alignment.
Bouncing after bumps, nose-dive under braking, uneven tire wear and fluid on the shock body are the usual signs.
Only when the listing says they are made for it. A stock-length shock on a lowered or lifted car runs near the end of its travel and wears early.
Check the top mounts and bump stops while the strut is out; worn ones are usually replaced at the same time.
Yes — monthly options show right under the Add to Cart button. Affirm, Klarna, PayPal Pay Later and Snap Finance are offered at checkout, and checking what you qualify for does not affect your credit score.
Install and care: shocks and struts
Before you start
- Plan to do both sides of the axle in one go.
- Check the top mounts and bump stops, and have replacements ready if they are worn.
Do
- Replace both sides of an axle together.
- Torque the lower bolts with the car at ride height and re-check after the first drive.
Don't
- Don't reuse a worn top mount or bump stop.
- Don't fit a stock-length shock to a lowered or lifted car.