Vossen

Vossen wheels: the brand and the lineup

Vossen wheels built their name on clean, deep-concave faces and finish quality that shows up in daylight. What started as a design-forward wheel brand for European luxury cars now spans coupes, sedans, trucks and SUVs, and their catalog at ThreePiece runs 291 configurations across eight diameters, from 17-inch up to 24-inch. The through-line is the same across every model: honest monoblock construction and a face that reads like it was drawn, not stamped.

Below is the full lineup we stock, walked model by model, so you can see what actually separates one Vossen from the next.

The Vossen wheels lineup, model by model

Hybrid Forged (HF) Series - flat-face, five-lug

The HF Series is Vossen's flat-face, mostly car-oriented line. The HF-2 is a mesh-influenced design offered in 19-, 20- and 21-inch and cast in 5x120, finished in gloss black. The HF-5 is the widest-ranging of the group - 19 through 23 inch, five different bolt patterns, and the only HF Series wheel we stock in both gloss black and matte gunmetal. The HF-7 keeps a split-spoke look in 20- and 22-inch. All three are monoblock and land at $749 in the sample 20x9 gloss black spec.

HF6 Series - the six-lug truck and SUV line

Where the HF Series is flat-faced, the HF6 wheels run deeper concave for six-lug fitments. The HF6-1 is a deep-face design in 22- and 24-inch, offered in gloss black and satin black. The HF6-3 adds a 20-inch option to that same deep-face philosophy. The HF6-4 is the workhorse of the group: the broadest diameter spread in the family (17 to 24 inch), the widest bolt-pattern coverage including eight-lug, and six finishes - gloss black, matte gunmetal, satin black, silver polished, terra bronze and tinted gloss black. The HF6-5 goes aggressive with a super-deep face and available negative offset, in four finishes.

HFX Series - directional, off-road-leaning designs

The HFX line pushes toward heavier truck and SUV builds with deeper, more mechanical faces. The HFX-1 is the range-topper for coverage - 17 through 22 inch, eight bolt patterns from 5x114.3 through 8x180, and six finishes. The HFX-2 is a focused 22-inch design in gloss black and terra bronze. The HFX-4 adds gloss gunmetal and satin bronze to the palette across 22- and 24-inch. The HFX-5 is the super-deep-face, negative-offset option built around eight-lug patterns, with six finishes. The HFX-6 spans 18 to 24 inch with the widest eight-lug reach in the series.

HF-8 and the Novitec collaboration

The HF-8 is a dedicated 24-inch, six-lug deep-concave wheel in gloss black at $1,149. At the top of the range sits the Novitec NF10, a Vossen-built, Novitec-designed monoblock in 21- and 22-inch for exotic applications - the sample rear runs 22x12 and lists at $3,075. It's a different animal from the rest of the catalog and priced accordingly.

Construction and finishes

Every Vossen model listed here is monoblock - a single piece of aluminum, no bolt-together assembly. It's the straightforward, structurally clean approach that keeps weight and cost sensible while holding Vossen's signature concave shapes. You can browse the whole range on the Vossen hub.

Finish coverage across the catalog spans eight options: gloss black, gloss gunmetal, matte gunmetal, satin black, satin bronze, silver polished, terra bronze and tinted gloss black. Not every model offers every finish - the HF6-4 and HFX-1 carry the deepest finish menus, while several designs ship in gloss black only.

Price and who it's for

Most of the HF and HFX Series sits at $749 per wheel in standard specs, with deeper and larger fitments running $849 to $1,149, and the Novitec NF10 in exotic territory at $3,075. That puts Vossen in the serious-enthusiast tier - above generic cast wheels, below full three-piece forged - for owners who want a recognizable design and clean finish work without stepping into custom-forged pricing. If you want to spread the cost, we offer Affirm and Katapult financing, as low as 0% APR.

Buying Vossen from ThreePiece

ThreePiece is an authorized Vossen dealer, so every wheel ships new and backed by the manufacturer, with free shipping on all orders. Want your setup ready to bolt on? Ask about mounted and balanced packages. If you have questions about a specific model or finish, our team gives expert fitment help by phone at 813-535-5801 - or reach us through contact us. New to the process? The FAQ covers the common questions, and you can start browsing current stock on the new wheels page.

Vossen wheels: the brand and the lineup

Vossen wheels built their name on clean, deep-concave faces and finish quality that shows up in daylight. What started as a design-forward wheel brand for European luxury cars now spans coupes, sedans, trucks and SUVs, and their catalog at ThreePiece runs 291 configurations across eight diameters, from 17-inch up to 24-inch. The through-line is the same across every model: honest monoblock construction and a face that reads like it was drawn, not stamped.

Below is the full lineup we stock, walked model by model, so you can see what actually separates one Vossen from the next.

The Vossen wheels lineup, model by model

Hybrid Forged (HF) Series - flat-face, five-lug

The HF Series is Vossen's flat-face, mostly car-oriented line. The HF-2 is a mesh-influenced design offered in 19-, 20- and 21-inch and cast in 5x120, finished in gloss black. The HF-5 is the widest-ranging of the group - 19 through 23 inch, five different bolt patterns, and the only HF Series wheel we stock in both gloss black and matte gunmetal. The HF-7 keeps a split-spoke look in 20- and 22-inch. All three are monoblock and land at $749 in the sample 20x9 gloss black spec.

HF6 Series - the six-lug truck and SUV line

Where the HF Series is flat-faced, the HF6 wheels run deeper concave for six-lug fitments. The HF6-1 is a deep-face design in 22- and 24-inch, offered in gloss black and satin black. The HF6-3 adds a 20-inch option to that same deep-face philosophy. The HF6-4 is the workhorse of the group: the broadest diameter spread in the family (17 to 24 inch), the widest bolt-pattern coverage including eight-lug, and six finishes - gloss black, matte gunmetal, satin black, silver polished, terra bronze and tinted gloss black. The HF6-5 goes aggressive with a super-deep face and available negative offset, in four finishes.

HFX Series - directional, off-road-leaning designs

The HFX line pushes toward heavier truck and SUV builds with deeper, more mechanical faces. The HFX-1 is the range-topper for coverage - 17 through 22 inch, eight bolt patterns from 5x114.3 through 8x180, and six finishes. The HFX-2 is a focused 22-inch design in gloss black and terra bronze. The HFX-4 adds gloss gunmetal and satin bronze to the palette across 22- and 24-inch. The HFX-5 is the super-deep-face, negative-offset option built around eight-lug patterns, with six finishes. The HFX-6 spans 18 to 24 inch with the widest eight-lug reach in the series.

HF-8 and the Novitec collaboration

The HF-8 is a dedicated 24-inch, six-lug deep-concave wheel in gloss black at $1,149. At the top of the range sits the Novitec NF10, a Vossen-built, Novitec-designed monoblock in 21- and 22-inch for exotic applications - the sample rear runs 22x12 and lists at $3,075. It's a different animal from the rest of the catalog and priced accordingly.

Construction and finishes

Every Vossen model listed here is monoblock - a single piece of aluminum, no bolt-together assembly. It's the straightforward, structurally clean approach that keeps weight and cost sensible while holding Vossen's signature concave shapes. You can browse the whole range on the Vossen hub.

Finish coverage across the catalog spans eight options: gloss black, gloss gunmetal, matte gunmetal, satin black, satin bronze, silver polished, terra bronze and tinted gloss black. Not every model offers every finish - the HF6-4 and HFX-1 carry the deepest finish menus, while several designs ship in gloss black only.

Price and who it's for

Most of the HF and HFX Series sits at $749 per wheel in standard specs, with deeper and larger fitments running $849 to $1,149, and the Novitec NF10 in exotic territory at $3,075. That puts Vossen in the serious-enthusiast tier - above generic cast wheels, below full three-piece forged - for owners who want a recognizable design and clean finish work without stepping into custom-forged pricing. If you want to spread the cost, we offer Affirm and Katapult financing, as low as 0% APR.

Buying Vossen from ThreePiece

ThreePiece is an authorized Vossen dealer, so every wheel ships new and backed by the manufacturer, with free shipping on all orders. Want your setup ready to bolt on? Ask about mounted and balanced packages. If you have questions about a specific model or finish, our team gives expert fitment help by phone at 813-535-5801 - or reach us through contact us. New to the process? The FAQ covers the common questions, and you can start browsing current stock on the new wheels page.