Blade Luxury

What Blade Luxury wheels are about

Blade Luxury wheels are big-diameter, cast monoblock rims built for the full-size truck and SUV crowd that wants shine and presence over subtlety. Every model in the current lineup rolls 22 inches or larger, and the range leans hard on deep chrome and bright machined faces. This is street-luxury and show-truck territory: bold spoke patterns, mirror finishes, and diameters that fill a wheel well. You can see the full catalog on the Blade Luxury hub.

The Blade Luxury wheels lineup

Six models make up the current range, and while they share a monoblock build philosophy, each one has its own face and finish personality.

BL-402 Pizarro

A 24-inch chrome monoblock and the only model that carries a 5x115 pattern alongside 6x139.7 as a fact of the casting. Full chrome, no machined contrast, straight mirror shine. See the BL-402 Pizarro; a typical spec is the 24x9.5 +15 Chrome at $599.58.

BSL-476 Sliced

The smallest and most affordable in the range at 22 inches, and the one that breaks from full chrome. It pairs a gloss black machined face with a stainless lip, so you get dark spokes against a bright outer edge. Browse the BSL-476 Sliced or the 22x9.5 +15 at $359.66, the entry point of the whole lineup.

RT-451 Bendetta

A 22-inch chrome monoblock in the six-lug side of the catalog. Same full-chrome treatment as the Pizarro but a different face and a smaller diameter. Check the RT-451 Bendetta; a common build is the 22x9.5 +25 Chrome at $547.16.

RT-452 Maddox

This one goes big, a full 26 inches, finished in silver and machined for a two-tone bright-and-satin look rather than mirror chrome. See the RT-452 Maddox or the 26x9.5 +25 Silver & Machined at $583.72.

RT-454 Sargon

A 24-inch chrome six-lug monoblock and the most expensive wheel in the range. It slots between the 22s and the 26s on diameter but tops the price sheet. View the RT-454 Sargon; the 24x9.5 +25 Chrome runs $676.20.

RT-457 Tundra

The other 26-inch monoblock, but where the Maddox goes silver, the Tundra runs gloss black and machined for a darker, higher-contrast face. Look at the RT-457 Tundra or the 26x9.5 +25 Gloss Black & Machined at $648.58.

Construction and finishes

Every Blade Luxury model is a monoblock, meaning the wheel is one piece rather than a bolted multi-piece assembly. Finishes across the range are Chrome, Gloss Black & Machined, Gloss Black Machined With Stainless Lip, and Silver & Machined. The chrome models keep it simple with straight mirror shine; the machined finishes add contrast with cut faces against darker or brighter backgrounds.

Price and who it's for

Blade Luxury runs from about $360 to $676 per wheel, so it sits in accessible big-diameter territory rather than premium-forged pricing. If you want 22-, 24- or 26-inch shine on a full-size truck or SUV without stepping up to a multi-piece budget, this is the lane. If you'd rather spread the cost, we offer financing through Affirm and Katapult, as low as 0% APR.

Buying Blade Luxury from ThreePiece

ThreePiece is an authorized Blade Luxury dealer, and every order ships with free shipping. Want the tires mounted and balanced before they arrive? Look at mounted packages. If you're new to the catalog, start with our new wheels section, and if you have questions on ordering the FAQ covers the common ones. For help confirming the right size for your vehicle, use our fitment calculator, call our team for expert fitment help at 813-535-5801, or reach us through the contact page.

What Blade Luxury wheels are about

Blade Luxury wheels are big-diameter, cast monoblock rims built for the full-size truck and SUV crowd that wants shine and presence over subtlety. Every model in the current lineup rolls 22 inches or larger, and the range leans hard on deep chrome and bright machined faces. This is street-luxury and show-truck territory: bold spoke patterns, mirror finishes, and diameters that fill a wheel well. You can see the full catalog on the Blade Luxury hub.

The Blade Luxury wheels lineup

Six models make up the current range, and while they share a monoblock build philosophy, each one has its own face and finish personality.

BL-402 Pizarro

A 24-inch chrome monoblock and the only model that carries a 5x115 pattern alongside 6x139.7 as a fact of the casting. Full chrome, no machined contrast, straight mirror shine. See the BL-402 Pizarro; a typical spec is the 24x9.5 +15 Chrome at $599.58.

BSL-476 Sliced

The smallest and most affordable in the range at 22 inches, and the one that breaks from full chrome. It pairs a gloss black machined face with a stainless lip, so you get dark spokes against a bright outer edge. Browse the BSL-476 Sliced or the 22x9.5 +15 at $359.66, the entry point of the whole lineup.

RT-451 Bendetta

A 22-inch chrome monoblock in the six-lug side of the catalog. Same full-chrome treatment as the Pizarro but a different face and a smaller diameter. Check the RT-451 Bendetta; a common build is the 22x9.5 +25 Chrome at $547.16.

RT-452 Maddox

This one goes big, a full 26 inches, finished in silver and machined for a two-tone bright-and-satin look rather than mirror chrome. See the RT-452 Maddox or the 26x9.5 +25 Silver & Machined at $583.72.

RT-454 Sargon

A 24-inch chrome six-lug monoblock and the most expensive wheel in the range. It slots between the 22s and the 26s on diameter but tops the price sheet. View the RT-454 Sargon; the 24x9.5 +25 Chrome runs $676.20.

RT-457 Tundra

The other 26-inch monoblock, but where the Maddox goes silver, the Tundra runs gloss black and machined for a darker, higher-contrast face. Look at the RT-457 Tundra or the 26x9.5 +25 Gloss Black & Machined at $648.58.

Construction and finishes

Every Blade Luxury model is a monoblock, meaning the wheel is one piece rather than a bolted multi-piece assembly. Finishes across the range are Chrome, Gloss Black & Machined, Gloss Black Machined With Stainless Lip, and Silver & Machined. The chrome models keep it simple with straight mirror shine; the machined finishes add contrast with cut faces against darker or brighter backgrounds.

Price and who it's for

Blade Luxury runs from about $360 to $676 per wheel, so it sits in accessible big-diameter territory rather than premium-forged pricing. If you want 22-, 24- or 26-inch shine on a full-size truck or SUV without stepping up to a multi-piece budget, this is the lane. If you'd rather spread the cost, we offer financing through Affirm and Katapult, as low as 0% APR.

Buying Blade Luxury from ThreePiece

ThreePiece is an authorized Blade Luxury dealer, and every order ships with free shipping. Want the tires mounted and balanced before they arrive? Look at mounted packages. If you're new to the catalog, start with our new wheels section, and if you have questions on ordering the FAQ covers the common ones. For help confirming the right size for your vehicle, use our fitment calculator, call our team for expert fitment help at 813-535-5801, or reach us through the contact page.