Fuel Pump Hangers

Select your vehicle to see Fuel Pump Hangers that fit

Fuel Pump Hangers: the assembly that holds your pump in the tank and feeds it fuel

A fuel pump hanger is the plate-and-bracket assembly that mounts through the top of the fuel tank, carries the pump (or pumps) down into the fuel, and routes the feed, return and wiring back out through the sending unit opening. When you upgrade to a higher-flow pump the factory hanger often can't accept it, so the fuel pump hangers here give you a proper mounting point, correct fittings, and a sealed pass-through instead of hacked-up stock parts. It's what turns a loose pump into a clean, serviceable install.

What ThreePiece stocks

This category currently shows 4 products from 2 brands: Radium Engineering and Aeromotive. Prices run from $423 to $541, which is the current range for what's in stock, not a fixed price. Coverage spans three makes - Chevrolet, BMW and Mitsubishi - across model years roughly 1988 to 2006, fitting vehicles like the Chevrolet C/K 1500 and 2500, the BMW 3 Series, and the Mitsubishi Lancer Evolution.

Concrete examples: the Radium Engineering BMW E46 hanger at $541.17, the Aeromotive C/K Truck 340 pump & hanger at $480.43, and the more affordable Aeromotive C/K Truck 200 pump & hanger at $423.35.

How to choose

The first question is whether you want the pump included. The two Aeromotive C/K Truck kits ship as a complete pump-and-hanger assembly, so you drop in one part. The Radium Mitsubishi Evo 1-6 hanger is listed pump not included - you supply the pump you want, which suits people already committed to a specific pump. Between the two Aeromotive truck kits, the 200 and 340 designations point to different flow, so match the kit to your power target and budget. After that, fitment is the deciding factor: pick the hanger built for your exact make, model and year.

What else you need

A hanger is one piece of the fuel system. If your chosen hanger doesn't include a pump, add one from Fuel Pumps. To plumb the feed and return lines you'll likely need Fittings and Adapters to match your line sizes. While you're in the tank and under the hood, it's worth browsing related engine work like Gasket Kits and Pistons. You can see everything in this section on the Engine Components parent page.

Fitment help and ordering

All four hangers listed here carry fitment data, so confirm your year, make and model before ordering. If you're not sure a part matches your car, call our fitment line at 813-535-5801 or reach us through Contact Us. Every order ships with free shipping, and Affirm financing is available if you'd rather spread the cost.

Fuel Pump Hangers: the assembly that holds your pump in the tank and feeds it fuel

A fuel pump hanger is the plate-and-bracket assembly that mounts through the top of the fuel tank, carries the pump (or pumps) down into the fuel, and routes the feed, return and wiring back out through the sending unit opening. When you upgrade to a higher-flow pump the factory hanger often can't accept it, so the fuel pump hangers here give you a proper mounting point, correct fittings, and a sealed pass-through instead of hacked-up stock parts. It's what turns a loose pump into a clean, serviceable install.

What ThreePiece stocks

This category currently shows 4 products from 2 brands: Radium Engineering and Aeromotive. Prices run from $423 to $541, which is the current range for what's in stock, not a fixed price. Coverage spans three makes - Chevrolet, BMW and Mitsubishi - across model years roughly 1988 to 2006, fitting vehicles like the Chevrolet C/K 1500 and 2500, the BMW 3 Series, and the Mitsubishi Lancer Evolution.

Concrete examples: the Radium Engineering BMW E46 hanger at $541.17, the Aeromotive C/K Truck 340 pump & hanger at $480.43, and the more affordable Aeromotive C/K Truck 200 pump & hanger at $423.35.

How to choose

The first question is whether you want the pump included. The two Aeromotive C/K Truck kits ship as a complete pump-and-hanger assembly, so you drop in one part. The Radium Mitsubishi Evo 1-6 hanger is listed pump not included - you supply the pump you want, which suits people already committed to a specific pump. Between the two Aeromotive truck kits, the 200 and 340 designations point to different flow, so match the kit to your power target and budget. After that, fitment is the deciding factor: pick the hanger built for your exact make, model and year.

What else you need

A hanger is one piece of the fuel system. If your chosen hanger doesn't include a pump, add one from Fuel Pumps. To plumb the feed and return lines you'll likely need Fittings and Adapters to match your line sizes. While you're in the tank and under the hood, it's worth browsing related engine work like Gasket Kits and Pistons. You can see everything in this section on the Engine Components parent page.

Fitment help and ordering

All four hangers listed here carry fitment data, so confirm your year, make and model before ordering. If you're not sure a part matches your car, call our fitment line at 813-535-5801 or reach us through Contact Us. Every order ships with free shipping, and Affirm financing is available if you'd rather spread the cost.