26 inch replica wheels from REPLICA bring big-diameter presence to trucks and full-size SUVs without the cost of forged one-offs. This page gathers every 26" REPLICA fitment on offer, with the exact models, finishes, and bolt patterns you can run today. Each design here is built as a one-piece monoblock, and every order ships free with financing available through Affirm.
Shop 26" REPLICA Wheels
Showing 25 in stock.
Why a 26-inch REPLICA wheel matters
Stepping up to a 26 fills the wheel well of a lifted or stock-height full-size platform and gives the truck a planted, finished stance that smaller diameters can't match. The monoblock construction used across these designs means each wheel is cast as a single piece rather than bolted together, which keeps the profile clean and the maintenance simple. If you want to compare diameters first, the 24" REPLICA wheels and 22" REPLICA wheels pages show how the same models scale down, while the 20" REPLICA wheels page covers the most conservative fit.
Which models and finishes come in 26"
The 26-inch lineup spans several designs, each carried in its own set of finishes. The 204 and 205 both reach 26"; the 204 comes in Gloss Black and Gunmetal Machined, while the 205 is offered in Chrome and Gloss Black. The 258 runs all the way to 28" and is carried in Black Machined, Chrome, Full Black, and Silver Machined. The 288 is one of the widest finish ranges here, with Black And Milled, Black Machined, Black Red Milled, Chrome, Full Black, Gloss Black, and Silver Machined. The 298 covers Chrome, Full Black, and Gloss Black, and the 328 and 348 add Black And Milled and additional milled accents. The 218 rounds out the 26" options with staggered-only finishes in the mix.
Browse all of these together through the full REPLICA lineup, or sort by color using the Black REPLICA wheels and Chrome REPLICA wheels pages.
Fitment coverage at 26 inches
Nearly all 26" designs here are drilled in 6x139.7, the classic six-lug pattern used by full-size domestic and import trucks and SUVs. The 218 also carries a five-lug option, so if you're working a car or crossover platform, check the 5x115 REPLICA wheels page for that bolt pattern. Confirm your bolt pattern, hub bore, and offset against your exact vehicle before ordering, since a 26 leaves little room for error on clearance.
How to choose your 26" set
Start with the bolt pattern your truck requires, then narrow by finish. Gloss and full-black tones like the 288 Full Black, 258 Full Black, and 328 Full Black give a blacked-out look, while milled and machined faces add contrast. For a brighter setup, the 205 and 204 show the gloss black face clearly, and the 348 and 298 demonstrate the same designs in their carried colors. If 26 turns out too aggressive for your build, the same families are available in smaller diameters.
Frequently Asked Questions
What bolt patterns do 26-inch REPLICA wheels come in?
The 26" designs are primarily drilled in 6x139.7 for full-size trucks and SUVs. The 218 also offers a 5x115 option. Always confirm against your specific vehicle.
How are these 26-inch wheels built?
The 26" REPLICA models, including the 204, 205, 258, 288, 298, 328, and 348, are all monoblock, meaning each wheel is a single one-piece casting.
What finishes are available at 26 inches?
Depending on the model, options include Gloss Black, Full Black, Chrome, Black Machined, Silver Machined, Gunmetal Machined, Black And Milled, and Black Red Milled.