QA1 63-72 Chevrolet C10 Rear Coil-Over Conversion System - Medium - Double Adjustable (200lbs/in) - RCK52616

It is listed for: 1965-1972 Chevrolet C10 Pickup. Pick your vehicle on this page to check your exact year and trim.

The maker's installation guide is on this page — see Installation guide under the part details for the step-by-step and the torque figures. Work on level ground with the car properly supported, and torque every fastener to the maker's figure. If the job is beyond your tools, any shop that does this kind of work can fit it.

Ride height is set on the threaded body or the lower mount, and the damping (how firm the shock feels) with the adjuster when the kit has one. Some kits also let you set spring preload and camber at the top mount. The Part details above list what this exact kit adjusts.

Yes. Changing ride height changes camber and toe, so have the car aligned once the height is set and the suspension has settled after a short drive.

Set all four corners before the alignment, keep the drop inside the maker's range, and re-check the height after the first drive because the springs settle. Going lower than the maker recommends costs ride quality and tire life.

The car settles a little over the first few drives. After that, re-check the ride height, the lock rings on the collars and the top-mount hardware, then get the alignment done.

Yes. Most coilovers are built for daily use when set to the maker's recommended height and a softer damping setting. Track-focused series ride firmer.

Yes — monthly options show right under the Add to Cart button. Affirm, Klarna, PayPal Pay Later and Snap Finance are offered at checkout, and checking what you qualify for does not affect your credit score.