Pro Comp Alloys 6x114.3 wheels make up the six-lug, mid-size truck and SUV side of the brand's off-road alloy range, with 17 fitments spread across six designs: the Pulse, Beacon, Wraith, Roughneck, Heritage and Kore. Each of these is built as a monoblock (one-piece) wheel, and Wheel Pros lists the Pulse, Wraith, Roughneck, Heritage and Beacon as cast aluminum construction. Every order ships free, and Affirm financing is available at checkout.
Shop 6x114.3 Pro Comp Alloys Wheels
Showing 17 in stock.
Shop all 6x114.3 Pro Comp Alloys wheels →
Why the 6x114.3 pattern matters
6x114.3 is the metric way of writing 6x4.5" — the same circle, just expressed in inches, which is why it is often published as “6x4.5/6x114.3.” It sits between the tighter five-lug patterns and the heavy 8-lug hubs, so wheels drilled for it need to balance a truck-rated load design with a face that still looks proportionate on a 16" to 18" diameter. Pro Comp's alloy program is organized by bolt pattern, size and finish color for exactly this reason: the same design is tooled in several drillings, and only the correct one belongs on your hubs. If your vehicle is not a 6x114.3, the closest neighbors are Pro Comp Alloys 6x139.7 wheels, 6x135 wheels and the five-lug 5x114.3 range — patterns that look similar on paper but are not interchangeable.
Models and finishes offered in this pattern
Six designs are drilled 6x114.3, and each has its own finish set:
- PA200 Pulse — Gloss Silver W/ Machined Face, a clean split-spoke look.
- PA203 Beacon — Gloss Silver W/ Machined Face; Pro Comp describes the Beacon as a callback to straightforward 80s and 90s wheel styling.
- PA205 Wraith — Matte Black or Gloss Silver W/ Machined Face.
- PA204 Roughneck — Matte Black.
- PA201 Heritage — Matte Black or Polished, and the widest-drilled design in the range.
- PA89 Kore — Flat Black or Polished; the 6x114.3 Kore is offered in 16x8 and 17x8 with a -12 offset in Flat Black.
Prefer to shop by color instead of model? Start with the black Pro Comp Alloys wheels or the machined and silver finishes, or browse the full Pro Comp Alloys lineup to see every design side by side.
Sizes and how to choose
The designs available in this drilling are produced in 16-, 17- and 18-inch diameters, with 17" being the deepest part of the range — see all 17" Pro Comp Alloys wheels, or step up to 18" fitments if you want more brake clearance and a shorter sidewall. Work in this order: confirm your hub is genuinely 6x114.3, pick the diameter your tire size and brakes allow, then choose offset. Negative offsets such as the Kore's -12 push the face outward for a wider stance and more fender fill, while offsets nearer zero keep the tire tucked closer to stock. Finally, match the finish to the truck — Matte and Flat Black hide trail rash best, while Polished and machined faces brighten a dark vehicle.
Want to see how a design looks in other configurations before committing? The Pulse 17x8 +20 in Gloss Silver W/ Machined Face and the Beacon 17x8 +20 Gloss Silver W/ Machined Face show both faces at $269, the Roughneck 17x8 +20 Matte Black runs $240, and the Heritage 16x8 +0 Polished is $265 — each in a different drilling, so match your own pattern before ordering.
Frequently Asked Questions
Which Pro Comp Alloys wheels are available in 6x114.3?
Six designs are drilled 6x114.3: the PA200 Pulse, PA203 Beacon, PA205 Wraith, PA204 Roughneck, PA201 Heritage and PA89 Kore, covering 17 fitments in total.
Is 6x114.3 the same as 6x4.5?
Yes. 6x114.3 is the millimeter figure and 6x4.5" is the inch equivalent of the same six-lug circle, which is why listings often show them together as 6x4.5/6x114.3.
How are these wheels built, and what finishes are offered?
All six designs are monoblock wheels, with the Pulse, Wraith, Roughneck, Heritage and Beacon published as cast aluminum. Finishes in this pattern include Matte Black, Flat Black, Polished and Gloss Silver W/ Machined Face.