Price Match Guarantee 
Free Shipping
LOW STOCK (4 units)
Only 4 left in stock
K&N Replacement Cabin Air Filter - VF2052
This wheel on real customer builds
See this part on video
Made by our team · tap a video to play it
📧 Get Fitment Help
Verify parts fit & get product recommendations
K&N Engineering
SKU:
KNNVF2052
|
- UPC:
- 024844373885
- Availability:
- Regularly stocked product
$54.00
Other K&N Engineering kits for this car
Fits these vehicles
- 2019 Ford RangerLariat, XL, XLT
Part details
- Part number
- KNNVF2052
- Manufacturer part number
- VF2052
- UPC
- 024844373885
- Brand
- K&N Engineering
- Prop 65
- ⚠️ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
- Instructions
- Installation instructions (PDF)
Installation guide (from K&N Engineering)
Hosted by K&N Engineering. Follow the maker's instructions and torque specs.
- Box size:
- 9.70 × 2.20 × 11.20 (in)
Finance it — pay over time
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
Low monthly payments
Affirm, Klarna or PayPal Pay Later: see your exact plan at checkout. Checking won’t affect your credit score.
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
- Affirm
- Klarna
- PayPal Pay Later
- Snap Finance
📧 Get Fitment Help
Verify parts fit & get product recommendations
Complete the job
Read before you buy
K&N Replacement Cabin Air Filter - VF2052
$54.00
-
-
-
Only 2 left in stock
-
K&N washable cabin air filters are engineered to fit directly into your factory air box, offering excellent protection from environmental contaminants and odor-causing particles. The thermally bonded high-flow synthetic material acts as a physical barrier, helping trap dust, pollen, mold, bacteria, fungi, and other pollutants, and is specially pleated to increase the contaminant-capturing surface area. Each filter is engineered to install easily into your factory cabin air box, and is designed to be easily washed and reinstalled whenever necessary. Buy with confidence under the K&N 10-Year/Million Mile Limited Warranty.
This Part Fits:
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2019 | Ford | Ranger | Lariat |
| 2019 | Ford | Ranger | XL |
| 2019 | Ford | Ranger | XLT |
- LTL:
- N
- MPN:
- VF2052
- Proposition 65:
- Y
- Special Order:
- N
- Clearance Item:
- N
PRODUCT REVIEWS (0)
Overall Rankings
Have you tried this product?
WRITE A REVIEWNo reviews for this product yet. Be the first to write a review!
Write a Review
K&N Engineering
K&N Replacement Cabin Air Filter - VF2052
K&N Replacement Cabin Air Filter - VF2052 FAQ
It is listed for: 2019 Ford Ranger. Pick your vehicle on this page to check your exact year and trim.
The maker's installation guide is on this page — see Installation guide under the part details for the step-by-step and the torque figures. Work on level ground with the car properly supported, and torque every fastener to the maker's figure. If the job is beyond your tools, any shop that does this kind of work can fit it.
Most intakes work with the stock tune. When an intake changes the sensor housing size, the maker says a tune is required.
Follow the maker's service interval. Dry filters are blown out or washed; oiled filters are washed and re-oiled with the maker's kit. Over-oiling can foul the airflow sensor.
Yes. Most intakes make the induction sound louder, especially at wide throttle.
Yes. An intake is usually a bolt-on job with hand tools; the maker's guide covers the clamps and the sensor move.
A full intake kit includes its filter; a replacement filter is sold on its own. See What's in the box above.
Yes — monthly options show right under the Add to Cart button. Affirm, Klarna, PayPal Pay Later and Snap Finance are offered at checkout, and checking what you qualify for does not affect your credit score.
Install and care: cabin air filters
Before you start
- Read the maker's guide for where the airflow sensor moves to.
- Have the clamps and hand tools the guide names within reach.
Do
- Seat every coupler fully and tighten the clamps evenly.
- Service the filter on the maker's interval and use the maker's cleaning kit.
Don't
- Don't over-oil an oiled filter; it fouls the airflow sensor.
- Don't run the engine with a coupler loose.