Price Match Guarantee 
Free Shipping
Write a Review
Write a Review
Icon Alloys
ICON 2019+ Ranger Multi Rate Leaf Spring Hardware Kit - 91200H
ICON 2019+ Ranger Multi Rate Leaf Spring Hardware Kit - 91200H
This wheel on real customer builds
See this part on video
Made by our team · tap a video to play it
📧 Get Fitment Help
Verify parts fit & get product recommendations
Icon Alloys
SKU:
ICO91200H
|
- UPC:
- 00840103411040
- Availability:
- Regularly stocked product
$158.35
Other Icon Alloys kits for this car
Fits these vehicles
- 2019-2023 Ford RangerLariat, XL, XLT
Part details
- Part number
- ICO91200H
- Manufacturer part number
- 91200H
- UPC
- 00840103411040
- Brand
- Icon Alloys
- Part type
- Hardware Kits - Other
- Prop 65
- ⚠️ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
- Instructions
- Installation instructions (PDF)
- In the box
- Application specific
- Black anodized billet aluminum bump plates
Installation guide (from Icon Alloys)
Hosted by Icon Alloys. Follow the maker's instructions and torque specs.
- Box size:
- 6.30 × 4.70 × 14.10 (in)
Finance it — pay over time
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
Low monthly payments
Affirm, Klarna or PayPal Pay Later: see your exact plan at checkout. Checking won’t affect your credit score.
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
- Affirm
- Klarna
- PayPal Pay Later
- Snap Finance
📧 Get Fitment Help
Verify parts fit & get product recommendations
Complete the job
Read before you buy
-
-
SaleOnly 3 left in stock
ICON 2019+ Ford Ranger Multi Rate Leaf Pack w/Add In Leaf - 198520A
Was $389.35 $387.40Free Shipping
-
-
Only 4 left in stock
The 2019-2023 Ford Ranger Multi Rate Leaf Spring Hardware kit includes quality E-coated U-bolts and hardware to prevent corrosion and ensure long product life. In addition, black anodized billet aluminum bump stop plates make sure that the rear compression travel is properly limited to prevent damage to the rear shock absorbers or other components in a full bottom out scenario.
The 2019-UP Ford Ranger Multi Rate Leaf Spring Hardware kit includes quality E-coated U-bolts and hardware to prevent corrosion and ensure long product life. In addition, black anodized billet aluminum bump stop plates make sure that the rear compression travel is properly limited to prevent damage to the rear shock absorbers or other components in a full bottom out scenario.
These ICON U-bolts are a square design made from high-strength steel. The U-bolts measure 8 inches in length and will work with stock setups or aftermarket leaf spring packs. Kit contains U-bolts, nuts, washers, and U-bolt bump plates.
2019-UP FORD RANGER MULTI RATE LEAF SPRING HARDWARE KIT
- U-bolts, nuts, and washers are E-coated for superior corrosion resistance
- Includes application specific, black anodized billet aluminum bump plates
- Clearance Item:
- N
- LTL:
- N
- MPN:
- 91200H
- Proposition 65:
- Y
- Special Order:
- N
PRODUCT REVIEWS (0)
Overall Rankings
Have you tried this product?
WRITE A REVIEWNo reviews for this product yet. Be the first to write a review!
Write a Review
Icon Alloys
ICON 2019+ Ranger Multi Rate Leaf Spring Hardware Kit - 91200H
ICON 2019+ Ranger Multi Rate Leaf Spring Hardware Kit - 91200H FAQ
It is listed for: 2019-2023 Ford Ranger. Pick your vehicle on this page to check your exact year and trim.
- Application specific
- Black anodized billet aluminum bump plates
The maker's installation guide is on this page — see Installation guide under the part details for the step-by-step and the torque figures. Work on level ground with the car properly supported, and torque every fastener to the maker's figure. If the job is beyond your tools, any shop that does this kind of work can fit it.
What's in the box above lists what the maker includes when we have it, and the maker's guide names any tools or extra parts.
Many parts are bolt-on jobs with hand tools; the maker's guide on this page shows the steps and the torque figures. If it is beyond your tools, a shop can fit it.
Check the vehicle list above against your exact year and trim before ordering. If something is off, call or text us at 813-535-5801 and we will sort it out.
Yes — monthly options show right under the Add to Cart button. Affirm, Klarna, PayPal Pay Later and Snap Finance are offered at checkout, and checking what you qualify for does not affect your credit score.
Install and care: Hardware Kits - Other
- Before you start, read the maker's guide on this page end to end and lay out every part against the What's in the box list.
- Do torque every fastener to the maker's figure with a torque wrench, and re-check it after the first drive.
- Don't force a part that does not line up: check the vehicle list on this page against your exact year and trim first.