Price Match Guarantee 
Free Shipping
IN STOCK (31 units)
Only 2 left in stock
Hardline Spare Belt Mount - 1 3/4 in. Bar Mount - SBM707
This wheel on real customer builds
See this part on video
Made by our team · tap a video to play it
📧 Get Fitment Help
Verify parts fit & get product recommendations
Hardline
SKU:
HRLSBM707
|
- UPC:
- 632194726307
- Availability:
- Regularly stocked product
$51.99
Other Hardline kits for this car
Fits these vehicles
Fitment not listed for this part yet — call or text 813-535-5801 and we will confirm it for your car.
Part details
- Part number
- HRLSBM707
- Manufacturer part number
- SBM707
- UPC
- 632194726307
- Brand
- Hardline
- Part type
- Brackets
- Special order
- Yes — ordered in for you; allow extra time
- In the box
- Molded foam pads for snug fit
- Not scratch frame
- Box size:
- 4.20 × 1.60 × 8.90 (in)
Finance it — pay over time
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
Low monthly payments
Affirm, Klarna or PayPal Pay Later: see your exact plan at checkout. Checking won’t affect your credit score.
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
- Affirm
- Klarna
- PayPal Pay Later
- Snap Finance
📧 Get Fitment Help
Verify parts fit & get product recommendations
Complete the job
Read before you buy
Hardline Spare Belt Mount - 1 3/4 in. Bar Mount - SBM707
$51.99
-
-
-
Only 2 left in stock
-
Out of stock
- No tools required for installation of mount and removal of belt
- Includes molded foam pads for snug fit and not scratch frame
- Machined from Structural Polyamide- Will not corrode
- Fits all 1.5" - 2" O.D. tube frames and roll bars
- Large thumbscrews-easier to grip and turn
- Holds belts 1 1/4" to 1 1/2 wide
- Impact, fade and fuel resistant
- Non-corrosive fasteners
Don't be stuck on the trail because you didn't bring a spare drive belt. Mounts your spare UTV Belt on your Polaris® or Arctic Cat® frame or roll cage.
- No tools required for installation of mount and removal of belt
- Includes molded foam pads for snug fit and not scratch frame
- Machined from Structural Polyamide- Will not corrode
- Fits all 1.5" - 2" O.D. tube frames and roll bars
- Large thumbscrews-easier to grip and turn
- Holds belts 1 1/4" to 1 1/2 wide
- Impact, fade and fuel resistant
- Non-corrosive fasteners
- Clearance Item:
- N
- LTL:
- N
- MPN:
- SBM707
- Proposition 65:
- N
- Special Order:
- Y
PRODUCT REVIEWS (0)
Overall Rankings
Have you tried this product?
WRITE A REVIEWNo reviews for this product yet. Be the first to write a review!
Write a Review
Hardline
Hardline Spare Belt Mount - 1 3/4 in. Bar Mount - SBM707
Hardline Spare Belt Mount - 1 3/4 in. Bar Mount - SBM707 FAQ
- Molded foam pads for snug fit
- Not scratch frame
What's in the box above lists what the maker includes when we have it, and the maker's guide names any tools or extra parts.
Many parts are bolt-on jobs with hand tools; the maker's guide on this page shows the steps and the torque figures. If it is beyond your tools, a shop can fit it.
Check the vehicle list above against your exact year and trim before ordering. If something is off, call or text us at 813-535-5801 and we will sort it out.
Yes — monthly options show right under the Add to Cart button. Affirm, Klarna, PayPal Pay Later and Snap Finance are offered at checkout, and checking what you qualify for does not affect your credit score.
Install and care: exterior
- Before you start, read the maker's guide on this page end to end and lay out every part against the What's in the box list.
- Do torque every fastener to the maker's figure with a torque wrench, and re-check it after the first drive.
- Don't force a part that does not line up: check the vehicle list on this page against your exact year and trim first.