Price Match Guarantee 
Free Shipping
Only 2 left in stock
Fabtech Offset Intrusion Beam Kit - FTS22296
This wheel on real customer builds
See this part on video
Made by our team · tap a video to play it
📧 Get Fitment Help
Verify parts fit & get product recommendations
Fabtech
SKU:
FABFTS22296
|
- UPC:
- 674866108028
$253.10
Other Fabtech kits for this car
Fits these vehicles
- 2019-2023 Ford RangerLariat, XL, XLT
Part details
- Part number
- FABFTS22296
- Manufacturer part number
- FTS22296
- UPC
- 674866108028
- Brand
- Fabtech
- Part type
- Chassis Bracing
- Prop 65
- ⚠️ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
- Special order
- Yes — ordered in for you; allow extra time
- Instructions
- Installation instructions (PDF)
Installation guide (from Fabtech)
Hosted by Fabtech. Follow the maker's instructions and torque specs.
- Box size:
- 7.00 × 6.00 × 15.00 (in)
Finance it — pay over time
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
Low monthly payments
Affirm, Klarna or PayPal Pay Later: see your exact plan at checkout. Checking won’t affect your credit score.
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
- Affirm
- Klarna
- PayPal Pay Later
- Snap Finance
📧 Get Fitment Help
Verify parts fit & get product recommendations
Complete the job
Read before you buy
-
-
-
Only 3 left in stock
-
Out of stock
Fabtech's Offset Intrusion Beam Kit for the 2019 Ford Ranger 4WD allows the use of larger tires. The factory Intrusion Beams are located in the front fenderwells, forward and back of the tire. They limit the size of the tire you can install, while being an integral part of the front collision safety impact feature of the vehicle. Rather than modifying or removing the Beams for tire clearance, Fabtech provides replacement Offset Intrusion Beams. They are constructed of 1/4 in. thick steel and are a welded box design for maximum strength.
Offset Intrusion Beam Kit;
Offset Intrusion Beam Kit
- Clearance Item:
- N
- LTL:
- N
- MPN:
- FTS22296
- Proposition 65:
- Y
- Special Order:
- Y
PRODUCT REVIEWS (0)
Overall Rankings
Have you tried this product?
WRITE A REVIEWNo reviews for this product yet. Be the first to write a review!
Write a Review
Fabtech
Fabtech Offset Intrusion Beam Kit - FTS22296
Fabtech Offset Intrusion Beam Kit - FTS22296 FAQ
It is listed for: 2019-2023 Ford Ranger. Pick your vehicle on this page to check your exact year and trim.
The maker's installation guide is on this page — see Installation guide under the part details for the step-by-step and the torque figures. Work on level ground with the car properly supported, and torque every fastener to the maker's figure. If the job is beyond your tools, any shop that does this kind of work can fit it.
What's in the box above lists what the maker includes when we have it, and the maker's guide names any tools or extra parts.
Many parts are bolt-on jobs with hand tools; the maker's guide on this page shows the steps and the torque figures. If it is beyond your tools, a shop can fit it.
Check the vehicle list above against your exact year and trim before ordering. If something is off, call or text us at 813-535-5801 and we will sort it out.
Yes — monthly options show right under the Add to Cart button. Affirm, Klarna, PayPal Pay Later and Snap Finance are offered at checkout, and checking what you qualify for does not affect your credit score.
Install and care: Chassis Bracing
- Before you start, read the maker's guide on this page end to end and lay out every part against the What's in the box list.
- Do torque every fastener to the maker's figure with a torque wrench, and re-check it after the first drive.
- Don't force a part that does not line up: check the vehicle list on this page against your exact year and trim first.