Price Match Guarantee 
Free Shipping
Out of stock
Edelbrock STD-Flang Fuel Reg Kit - 8192
This wheel on real customer builds
See this part on video
Made by our team · tap a video to play it
📧 Get Fitment Help
Verify parts fit & get product recommendations
Edelbrock
SKU:
EDE8192
|
- UPC:
- 085347081929
$224.95
Other Edelbrock kits for this car
Fits these vehicles
Fitment not listed for this part yet — call or text 813-535-5801 and we will confirm it for your car.
Part details
- Part number
- EDE8192
- Manufacturer part number
- 8192
- UPC
- 085347081929
- Brand
- Edelbrock
- Part type
- Fuel Pressure Regulators
- CARB
- Not for sale or use in California (no CARB EO)
- Prop 65
- ⚠️ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
- Special order
- Yes — ordered in for you; allow extra time
- Instructions
- Installation instructions (PDF)
Installation guide (from Edelbrock)
Hosted by Edelbrock. Follow the maker's instructions and torque specs.
- Box size:
- 11.50 × 0.50 × 17.69 (in)
Finance it — pay over time
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
Low monthly payments
Affirm, Klarna or PayPal Pay Later: see your exact plan at checkout. Checking won’t affect your credit score.
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
- Affirm
- Klarna
- PayPal Pay Later
- Snap Finance
📧 Get Fitment Help
Verify parts fit & get product recommendations
Complete the job
Read before you buy
-
-
Out of stock
-
Out of stock
-
Out of stock
This Edelbrock Fuel Pressure Regulator kit #8192 allows for the adjustment of fuel pressure from 4-1/2 to 9 psi. Match with Edelbrock racing fuel pumps. Kits include fittings, standard flange mounting plate, fuel line and regulator. Fuel line from fuel pump to regulator is not included; use #8122 or #8127 below for fuel pumps with 1/2" NPT outlets.
This Edelbrock Fuel Pressure Regulator kit #8192 allows for the adjustment of fuel pressure from 4-1/2 to 9 psi. Match with Edelbrock racing fuel pumps. Kits include fittings, standard flange mounting plate, fuel line and regulator. Fuel line from fuel pump to regulator is not included
use #8122 or #8127 below for fuel pumps with 1/2" NPT outlets.
Edelbrock Standard Flange Single Regulator Plate Kit
- Use w/Holley Standard-Flange Duel-Feed
- Clearance Item:
- N
- LTL:
- N
- MPN:
- 8192
- Proposition 65:
- Y
- Special Order:
- Y
PRODUCT REVIEWS (0)
Overall Rankings
Have you tried this product?
WRITE A REVIEWNo reviews for this product yet. Be the first to write a review!
Write a Review
Edelbrock
Edelbrock STD-Flang Fuel Reg Kit - 8192
Edelbrock STD-Flang Fuel Reg Kit - 8192 FAQ
No — this part has no CARB Executive Order, so it is not for sale or use in California or on vehicles registered there.
The maker's installation guide is on this page — see Installation guide under the part details for the step-by-step and the torque figures. Work on level ground with the car properly supported, and torque every fastener to the maker's figure. If the job is beyond your tools, any shop that does this kind of work can fit it.
What's in the box above lists what the maker includes when we have it, and the maker's guide names any tools or extra parts.
Many parts are bolt-on jobs with hand tools; the maker's guide on this page shows the steps and the torque figures. If it is beyond your tools, a shop can fit it.
Check the vehicle list above against your exact year and trim before ordering. If something is off, call or text us at 813-535-5801 and we will sort it out.
Yes — monthly options show right under the Add to Cart button. Affirm, Klarna, PayPal Pay Later and Snap Finance are offered at checkout, and checking what you qualify for does not affect your credit score.
Install and care: Fuel Pressure Regulators
- Before you start, read the maker's guide on this page end to end and lay out every part against the What's in the box list.
- Do torque every fastener to the maker's figure with a torque wrench, and re-check it after the first drive.
- Don't force a part that does not line up: check the vehicle list on this page against your exact year and trim first.