EBC S15 Brake Pad and Rotor Kit - S15KF1242
This wheel on real customer builds
See this part on video
Made by our team · tap a video to play it
📧 Get Fitment Help
Verify parts fit & get product recommendations
- 2013-2016 Audi Q5Hybrid Prestige
- 2012-2018 Audi Q5Premium, Premium Plus, Prestige
- 2014-2015 Audi Q5TDI Premium Plus, TDI Prestige
- Part number
- EBCS15KF1242
- Manufacturer part number
- S15KF1242
- Brand
- EBC
- Part type
- Brake Rotors - Slotted
- Prop 65
- ⚠️ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
- Special order
- Yes — ordered in for you; allow extra time
- Rotor type
- Slotted
Complete the job
Read before you buy
Save 10% from buying separate parts with EBC Brakes quality brake kit. High efficiency EBC pads with patented EBC Brake-in coating and premium rotors with thermic anti rust coating, fully balanced and run-out tested for smooth braking.
S15 Kit Extra Duty and USR Rotors; Front; FMSI Pad No. D1322; Vented; 5 Bolt Holes; 345mm Dia.; 52.1mm Height; 30mm Thick; 68mm Center Hole Dia.;
S15 Kit Extra Duty and USR Rotors
68mm Center Hole Dia.
- Stable Friction Coefficient Under Load And Frequent Snubbing
- Superb Fit for Towing and Off Roading
- Usr Fine Slotted G3000 Sport Rotors
- Geomet Anti Rust Coating
- Clearance Item:
- N
- LTL:
- N
- MPN:
- S15KF1242
- Proposition 65:
- Y
- Special Order:
- Y
PRODUCT REVIEWS (0)
Overall Rankings
Have you tried this product?
WRITE A REVIEWNo reviews for this product yet. Be the first to write a review!
Write a Review
EBC
EBC S15 Brake Pad and Rotor Kit - S15KF1242
EBC S15 Brake Pad and Rotor Kit - S15KF1242 FAQ
It is listed for: 2013-2016 Audi Q5; 2012-2018 Audi Q5; 2014-2015 Audi Q5. Pick your vehicle on this page to check your exact year and trim.
Yes. A series of firm slowdowns from moderate speed, without coming to a stop, lays an even layer of pad material on the rotor. Follow the maker's bed-in steps.
New pads on worn or grooved rotors bed poorly and can squeal; if the rotors are worn or lipped, replace both.
Not for a pad or rotor change. Calipers or lines open the system, so it has to be bled, and fresh fluid is the normal choice then.
Larger calipers and rotors need wheel clearance. The Part details list the minimum wheel size when the maker states it, and the maker's clearance template settles any doubt.
Usually incomplete bed-in, missing shims or anti-squeal paste, or an aggressive compound. Bed them in and check the hardware first.
Pads and rotors are a common home job with jack stands, a torque wrench and the right sockets. Calipers and lines need bleeding, so a shop is the safer choice if you have not bled brakes before.
Yes — monthly options show right under the Add to Cart button. Affirm, Klarna, PayPal Pay Later and Snap Finance are offered at checkout, and checking what you qualify for does not affect your credit score.
Install and care: brake rotors
Before you start
- Read the maker's bed-in steps so you can do them right after the install.
- Check the rotors, hardware and fluid while the wheels are off.
Do
- Bed the pads and rotors in right away, following the maker's steps.
- Use the new hardware and shims the kit includes.
Don't
- Don't put new pads on worn, grooved or lipped rotors.
- Don't drive hard before the bed-in is done.
Price Match Guarantee
Free Shipping