Price Match Guarantee 
Free Shipping
Only 1 left in stock
EBC S11 Brake Pad and Rotor Kit - S11KR1111
This wheel on real customer builds
See this part on video
Made by our team · tap a video to play it
📧 Get Fitment Help
Verify parts fit & get product recommendations
EBC
SKU:
EBCS11KR1111
$403.09
$424.30
(You save
$21.21
)
Other EBC kits for this car
Fits these vehicles
- 2006 Mercedes-Benz CLS500Base
- 2006-2016 Mercedes-Benz E3504Matic, Base
- 2011-2013 Mercedes-Benz E350Bluetec
- 2015-2017 Mercedes-Benz E4004Matic, Base
- 2013-2015 Mercedes-Benz E400Hybrid
- 2005-2006 Mercedes-Benz E5004Matic
Part details
- Part number
- EBCS11KR1111
- Manufacturer part number
- S11KR1111
- Brand
- EBC
- Part type
- Brake Pads - Performance
- Prop 65
- ⚠️ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
- Special order
- Yes — ordered in for you; allow extra time
- Instructions
- Installation instructions (PDF)
- Pad compound
- Greenstuff
Installation guide (from EBC)
Hosted by EBC. Follow the maker's instructions and torque specs.
Finance it — pay over time
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
Low monthly payments
Affirm, Klarna or PayPal Pay Later: see your exact plan at checkout. Checking won’t affect your credit score.
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
- Affirm
- Klarna
- PayPal Pay Later
- Snap Finance
📧 Get Fitment Help
Verify parts fit & get product recommendations
Complete the job
Read before you buy
-
-
Only 1 left in stock
-
Only 5 left in stock
-
Out of stock
Save 15% over cost of buying separate parts with this quality pad and rotor kit which includes pads rotorspads rotors and caliper lube. If you desire a modest brake improvement for normal speeds on any Sport compact, this Kit will be your best choice.High efficiency EBC pads built with Aramid fiber,fully shimmed,slotted and chamfered and featuring the EBC patented Brake-in coating for fast pad seating after install. Rotors are a direct fit OEM replacement with geomet anti rust surface coating, fully balanced and runout tested for smooth braking.
S11 Kits Greenstuff 2000 and RK Rotors; Rear; FMSI Pad No. D1424; Vented; 5 Bolt Holes; 300mm Dia.; 68mm Height; 22mm Thick; 67mm Center Hole Dia.;
S11 Kits Greenstuff 2000 and RK Rotors
67mm Center Hole Dia.
- Sport Compact Upgrade Kit With Premium OEM Style Rotors
- Direct Fit No Changes Required Over Stock Set UP
- Moderate Upgrade Over OE Performance
- Premium G 3000 OEM Style Rotors
- 10;000 Mile No Hassle Warranty
- 000 Mile No Hassle Warranty
- Geomet Anti Rust Coating
- For Spirited Driving
- 10
- Clearance Item:
- N
- LTL:
- N
- MPN:
- S11KR1111
- Proposition 65:
- Y
- Special Order:
- Y
PRODUCT REVIEWS (0)
Overall Rankings
Have you tried this product?
WRITE A REVIEWNo reviews for this product yet. Be the first to write a review!
Write a Review
EBC
EBC S11 Brake Pad and Rotor Kit - S11KR1111
EBC S11 Brake Pad and Rotor Kit - S11KR1111 FAQ
It is listed for: 2006 Mercedes-Benz CLS500; 2006-2016 Mercedes-Benz E350; 2011-2013 Mercedes-Benz E350 and more (see the full list above). Pick your vehicle on this page to check your exact year and trim.
The maker's installation guide is on this page — see Installation guide under the part details for the step-by-step and the torque figures. Work on level ground with the car properly supported, and torque every fastener to the maker's figure. If the job is beyond your tools, any shop that does this kind of work can fit it.
Yes. A series of firm slowdowns from moderate speed, without coming to a stop, lays an even layer of pad material on the rotor. Follow the maker's bed-in steps.
New pads on worn or grooved rotors bed poorly and can squeal; if the rotors are worn or lipped, replace both.
Not for a pad or rotor change. Calipers or lines open the system, so it has to be bled, and fresh fluid is the normal choice then.
Larger calipers and rotors need wheel clearance. The Part details list the minimum wheel size when the maker states it, and the maker's clearance template settles any doubt.
Usually incomplete bed-in, missing shims or anti-squeal paste, or an aggressive compound. Bed them in and check the hardware first.
Pads and rotors are a common home job with jack stands, a torque wrench and the right sockets. Calipers and lines need bleeding, so a shop is the safer choice if you have not bled brakes before.
Yes — monthly options show right under the Add to Cart button. Affirm, Klarna, PayPal Pay Later and Snap Finance are offered at checkout, and checking what you qualify for does not affect your credit score.
Install and care: brake pads
Before you start
- Read the maker's bed-in steps so you can do them right after the install.
- Check the rotors, hardware and fluid while the wheels are off.
Do
- Bed the pads and rotors in right away, following the maker's steps.
- Use the new hardware and shims the kit includes.
Don't
- Don't put new pads on worn, grooved or lipped rotors.
- Don't drive hard before the bed-in is done.