Price Match Guarantee 
Free Shipping
LOW STOCK (2 units)
Only 1 left in stock
Dinan 12-18 BMW 335i/435i/M2 Cold Air Intake - D760-0038
This wheel on real customer builds
See this part on video
Made by our team · tap a video to play it
📧 Get Fitment Help
Verify parts fit & get product recommendations
Dinan
SKU:
DNND760-0038
- Availability:
- Regularly stocked product
$571.95
$643.95
(You save
$72.00
)
Other Dinan kits for this car
Fits these vehicles
- 2012-2015 BMW 335iBase
- 2013-2015 BMW 335i xDriveBase
- 2014-2016 BMW 435iBase
- 2015-2016 BMW 435i Gran CoupeBase
- 2014-2016 BMW 435i xDriveBase
- 2015-2016 BMW 435i xDrive Gran CoupeBase
- 2016-2018 BMW M2Base
- 2014-2016 BMW M235iBase
- 2015-2016 BMW M235i xDriveBase
Part details
- Part number
- DNND760-0038
- Manufacturer part number
- D760-0038
- Brand
- Dinan
- Part type
- Cold Air Intakes
- CARB
- Not for sale or use in California (no CARB EO)
- Instructions
- Installation instructions (PDF)
- Material
- Carbon fiber
Installation guide (from Dinan)
Hosted by Dinan. Follow the maker's instructions and torque specs.
- Box size:
- 18.00 × 9.80 × 23.60 (in)
Finance it — pay over time
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
Low monthly payments
Affirm, Klarna or PayPal Pay Later: see your exact plan at checkout. Checking won’t affect your credit score.
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
- Affirm
- Klarna
- PayPal Pay Later
- Snap Finance
📧 Get Fitment Help
Verify parts fit & get product recommendations
Complete the job
Read before you buy
Dinan 12-18 BMW 335i/435i/M2 Cold Air Intake - D760-0038
$571.95
-
-
Only 3 left in stock
-
-
Only 1 left in stock
Efficiency and maximizing the potential of the stock intake design were the keys to development for this N55 intake. Our sealed system delivers as much cold outside air as possible to the engine via an optimized carbon fiber tube that mimics the stock pipe but with less resistance with a straighter freer flowing design. The increased amount of air feeds into a larger volume airbox complete with a larger filter that elicits a sporty tone that makes the intake sound as good as it performs. This optimized design yields up to an incredible 10HP and 15 lb-ft of torque even without any additional modifications. Simply perform the short bolt-on installation in under an hour and enjoy a more powerful and audibly satisfying driving experience.
Dinan Cold Air Intake - 2012-2018 BMW 335i/435i/M2/M235i
Carbon Fiber - F22/F23/F30/F32/F33/F36/F87
- 50 State Emissions Legal (partial application list): CARB EO D-176-56 (2012-15 F30 335i Only)
- Larger volume air box that completely seals for maximum insulation from power robbing heat
- More Power: + 10 HP, + 15 LB-FT (w/o additional modifications on all other platforms))
- More Power: + 8 HP, + 6 LB-FT (w/o additional modifications on the M2)
- Enlarged cylindrical air filter for optimum flow
- Optimized carbon fiber intake tube
- Quick and easy installation
- Improved throttle response
- Sportier Sound
- Larger MAF
- Clearance Item:
- N
- LTL:
- N
- MPN:
- D760-0038
- Special Order:
- N
PRODUCT REVIEWS (0)
Overall Rankings
Have you tried this product?
WRITE A REVIEWNo reviews for this product yet. Be the first to write a review!
Write a Review
Dinan
Dinan 12-18 BMW 335i/435i/M2 Cold Air Intake - D760-0038
Dinan 12-18 BMW 335i/435i/M2 Cold Air Intake - D760-0038 FAQ
It is listed for: 2012-2015 BMW 335i; 2013-2015 BMW 335i xDrive; 2014-2016 BMW 435i and more (see the full list above). Pick your vehicle on this page to check your exact year and trim.
No — this part has no CARB Executive Order, so it is not for sale or use in California or on vehicles registered there.
The maker's installation guide is on this page — see Installation guide under the part details for the step-by-step and the torque figures. Work on level ground with the car properly supported, and torque every fastener to the maker's figure. If the job is beyond your tools, any shop that does this kind of work can fit it.
Most intakes work with the stock tune. When an intake changes the sensor housing size, the maker says a tune is required.
Follow the maker's service interval. Dry filters are blown out or washed; oiled filters are washed and re-oiled with the maker's kit. Over-oiling can foul the airflow sensor.
Yes. Most intakes make the induction sound louder, especially at wide throttle.
Yes. An intake is usually a bolt-on job with hand tools; the maker's guide covers the clamps and the sensor move.
A full intake kit includes its filter; a replacement filter is sold on its own. See What's in the box above.
Yes — monthly options show right under the Add to Cart button. Affirm, Klarna, PayPal Pay Later and Snap Finance are offered at checkout, and checking what you qualify for does not affect your credit score.
Install and care: cold air intake
Before you start
- Read the maker's guide for where the airflow sensor moves to.
- Have the clamps and hand tools the guide names within reach.
Do
- Seat every coupler fully and tighten the clamps evenly.
- Service the filter on the maker's interval and use the maker's cleaning kit.
Don't
- Don't over-oil an oiled filter; it fouls the airflow sensor.
- Don't run the engine with a coupler loose.