Clevite 6G72 Engine Con Rod Bearing Set - CB1411H

The Clevite CB1411H 6G72 Engine Con Rod Bearing Set is a purpose-built connecting rod bearing set designed specifically for the Mitsubishi 6G72 engine family. Whether you're rebuilding a worn bottom end or freshening up an engine that's been pushed hard, Clevite's H-Series bearings are a trusted choice among engine builders who demand reliable, precision-fit components. Part number CB1411H (SKU: CLECB1411H) is in stock and ready to ship from ThreePiece.us at $70.39.

Key Features & Benefits

• H-Series Performance Construction: Clevite H-Series bearings feature a medium level of eccentricity, high crush, and a hardened steel back with a thin overlay — a combination that supports strong oil film retention and durability under demanding operating conditions.
• No Flash Plating for Better Seating: These bearings are made without flash plating, which promotes better initial seating between the bearing and journal surfaces during break-in — an important detail for engine longevity and consistent oil clearances.
• Designed for Oversize Fillet Crankshafts: H-Series bearings are the correct choice when used with crankshafts that have oversize fillets, making them well-suited for engines that have been reground or built with aftermarket cranks that use larger fillet radii.
• Ideal for High-Stress Applications: The H-Series designation indicates these bearings are engineered for use in engines running under higher loads and stress levels, making them popular for performance builds and engine rebuilds where OE-spec bearings may not be appropriate.
• Hardened Steel Back: The hardened steel backing provides structural rigidity and helps maintain proper bearing geometry even when crush loads are applied during assembly.
• Thin Overlay: The thin overlay layer is designed to conform to journal imperfections while maintaining tight oil clearances — a key factor in oil pressure and bearing life.

Specifications

• Manufacturer Part Number (MPN): CB1411H
• SKU: CLECB1411H
• UPC: 027067886736
• Brand: Clevite
• Series: H-Series
• Bearing Type: Connecting Rod (Con Rod) Bearing Set
• Engine Application: Mitsubishi 6G72
• Construction: Hardened steel back, thin overlay, no flash plating
• Eccentricity: Medium
• Crush: High

Fitment

This bearing set is designed to fit engines using the Mitsubishi 6G72 engine architecture. The 6G72 is a 3.0L V6 engine that appeared across a wide range of Mitsubishi and Chrysler/Dodge vehicles over many model years, including (but not limited to) the Mitsubishi 3000GT, Mitsubishi Eclipse (select variants), Mitsubishi Galant VR4, Mitsubishi Montero, Mitsubishi Diamante, Dodge Stealth, and Chrysler-branded applications that shared this platform. Because the 6G72 was used across multiple decades and configurations — including naturally aspirated and turbocharged variants — always verify your specific engine code and any machine work (such as crankshaft regrinding or fillet sizing) before ordering. If your crankshaft has been reground to an undersize, you may require an undersize bearing; contact our team to confirm the correct part for your build. The CB1411H is the standard (non-X suffix) version; an HX variant also exists for different sizing applications.

What's in the Box

This listing includes the complete Clevite CB1411H connecting rod bearing set for the 6G72 engine. As is standard with Clevite con rod bearing sets, the package includes the full set of upper and lower bearing shells required for one complete engine's connecting rods. Verify the quantity of rod journals in your specific 6G72 variant when confirming you have all parts needed for your rebuild.

Why Buy from ThreePiece.us

• Free Shipping on Every Order: The Clevite CB1411H ships free to your door — no minimum required.
• Affirm Financing Available: Break your purchase into manageable payments with Affirm financing at checkout — helpful for larger engine rebuild parts orders.
• Expert Fitment Support: Not sure if CB1411H is the right bearing for your specific 6G72 build? Our team has served 10,000+ customers and can help you verify the correct part. Reach us by phone at 813-535-5801 or email at [email protected].
• In Stock and Ready to Ship: This item is a regularly stocked product — no special order wait times on the standard CB1411H.
• Price Match Guarantee: Found it cheaper elsewhere? ThreePiece.us offers a price match guarantee on all products.

Frequently Asked Questions

Q: What makes the H-Series different from standard Clevite bearings?
A: Clevite H-Series bearings are built with a medium level of eccentricity, high crush, and a hardened steel back with a thin overlay. They are also made without flash plating to promote better seating. These characteristics make them appropriate for performance rebuilds and for use with crankshafts that have oversize fillets — applications where a standard OE-style bearing may not be the right fit.

Q: Can I use CB1411H if my crankshaft has been reground?
A: H-Series bearings are specifically recommended for use with crankshafts that have oversize fillets. However, if your crankshaft journals have been reground to an undersize dimension, you will need to match the bearing to that undersize. CB1411H is the standard-size H-Series bearing. Contact our fitment team to confirm the correct part number for your specific machine work.

Q: Is the CB1411H the same as the CB1411HX?
A: No — the CB1411HX is a separate part number and applies to a different size specification. Both are H-Series bearings for the 6G72, but they are not interchangeable. Always verify your required bearing size before ordering.

Q: How long will it take to receive this order?
A: The CB1411H is a regularly stocked product at ThreePiece.us and ships free on every order. This is not a special-order item, so you can expect standard shipping lead times rather than extended made-to-order wait periods.