Carolina Forged 5x150 wheels bring the brand's monoblock forged build to trucks and SUVs running the 5x150 bolt pattern, with diameters from 20 up to 30 inches in a bright High Polish finish. Every model in the lineup is offered in 5x150, so you can match the same silhouette across a wide range of fitments. Each order ships free, and financing is available through Affirm.
Shop 5x150 Carolina Forged Wheels
Showing 36 in stock.
Shop all 5x150 Carolina Forged wheels →
Why 5x150 Carolina Forged matters
The 5x150 bolt pattern is one of the most recognizable full-size platforms, and forged construction is the reason these wheels can stretch to the largest diameters without the weight penalty of cheaper cast designs. Carolina Forged builds these as a single-piece monoblock, which keeps the face, spokes, and barrel as one continuous forged structure. Paired with the mirror-like High Polish, that makes for a clean, show-ready look on a lifted or stock-height truck.
Models & finishes offered in 5x150
Six designs cover the 5x150 fitment, each available in High Polish: the Asheville, Charleston, Charlotte, Florence, Myrtle, and Raleigh. All six share the same monoblock forged construction and the full 20-through-30-inch diameter range, so the choice comes down to spoke design rather than build. You can browse the entire range from the full Carolina Forged lineup.
Sizing across the range
Diameters span 20-inch and 22-inch for a tighter, street-focused stance, then climb through 24-inch and 26-inch, up to the big 28-inch and 30-inch setups for a maximum-presence build.
Fitment coverage
This page focuses on 5x150, a pattern commonly associated with full-size trucks and SUVs such as the Toyota Tundra and Sequoia. If your vehicle uses a different pattern, the same models are also carried in five-lug 5x127, 5x135, and 5x139.7, plus six-lug 6x135 and 6x139.7. Heavy-duty eight-lug trucks are covered too, with 8x165.1, 8x170, and 8x180 options. Always confirm your hub bore and offset against your specific trim before ordering.
How to choose
Start with the look: pick the spoke pattern that fits your build, since every design carries the same forged foundation and finish. Next, set your diameter for the stance you want, keeping in mind that larger wheels generally call for lower-profile tires. A practical starting point is a 20-inch setup like the Asheville 20x9 or the Charleston 20x9, both priced at $749.75 in High Polish. The Charlotte, Florence, Myrtle, and Raleigh round out the same size at matching value.
Frequently Asked Questions
Which Carolina Forged models come in 5x150?
All six designs are offered in 5x150: Asheville, Charleston, Charlotte, Florence, Myrtle, and Raleigh, each in a High Polish finish.
What diameters are available?
Sizes run from 20, 22, 24, 26, and 28 inches up to 30 inches, so you can scale the stance from a street setup to a large-diameter build.
How are these wheels built?
Each model in the lineup is a single-piece monoblock forging, where the face and barrel are formed from one continuous forged structure.