Price Match Guarantee 
Free Shipping
LOW STOCK (1 units)
Only 1 left in stock
Camburg 2.50 Rear RHT 4130HT Snout (4.00 x .250) - CAM-020077
This wheel on real customer builds
See this part on video
Made by our team · tap a video to play it
📧 Get Fitment Help
Verify parts fit & get product recommendations
Camburg
SKU:
CMBCAM-020077
|
- UPC:
- 888563188386
$337.00
Other Camburg kits for this car
Fits these vehicles
Fitment not listed for this part yet — call or text 813-535-5801 and we will confirm it for your car.
Part details
- Part number
- CMBCAM-020077
- Manufacturer part number
- CAM-020077
- UPC
- 888563188386
- Brand
- Camburg
- Part type
- Flanges
- Special order
- Yes — ordered in for you; allow extra time
- Box size:
- 8.00 × 4.00 × 10.00 (in)
Finance it — pay over time
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
Low monthly payments
Affirm, Klarna or PayPal Pay Later: see your exact plan at checkout. Checking won’t affect your credit score.
Bad credit or no credit? No problem. Lease-to-own with Snap Finance: no credit needed, approvals up to $5,000, as low as /week. Get started
- Affirm
- Klarna
- PayPal Pay Later
- Snap Finance
📧 Get Fitment Help
Verify parts fit & get product recommendations
Complete the job
Read before you buy
Camburg 2.50 Rear RHT 4130HT Snout (4.00 x .250) - CAM-020077
$337.00
-
-
Only 2 left in stock
-
Only 2 left in stock
-
Only 1 left in stock
Camburg Ford F-250/350 4WD 05-23 Uniball Radius Arm Kit - CAM-110204
$1,699.00$2,442.14Free Shipping
These 2.50 spindle snouts are CNC machined in-house from aircraft quality 4130 chromoly. Starting with a billet 4130 bar we machine them to rough dimensions of the final part. We then have them heat-treated for increased strength and surface hardness and stress relieved by a leading aerospace facility. After heat-treatment we then machine and thread the critical dimensions and bearing surfaces to 0.001" tolerances. These are also what we use in our complete rear ends that utilize our 2.50 hubs. These are complete and include the locking nut and hardware. We offer these in both right hand and left hand thread versions so order one of each when needing a set. Also select the correct tubing size of the axle housing you're using them in. For Camburg 2.50 rear hubs.
Camburg 2.50" Rear Weld-in Snouts
2.50" Rear Weld-in Snouts
- CNC machined in-house
- Made in the USA
- 4130 Chromoly
- Clearance Item:
- N
- LTL:
- N
- MPN:
- CAM-020077
- Proposition 65:
- N
- Special Order:
- Y
PRODUCT REVIEWS (0)
Overall Rankings
Have you tried this product?
WRITE A REVIEWNo reviews for this product yet. Be the first to write a review!
Write a Review
Camburg
Camburg 2.50 Rear RHT 4130HT Snout (4.00 x .250) - CAM-020077
Camburg 2.50 Rear RHT 4130HT Snout (4.00 x .250) - CAM-020077 FAQ
What's in the box above lists what the maker includes when we have it, and the maker's guide names any tools or extra parts.
Many parts are bolt-on jobs with hand tools; the maker's guide on this page shows the steps and the torque figures. If it is beyond your tools, a shop can fit it.
Check the vehicle list above against your exact year and trim before ordering. If something is off, call or text us at 813-535-5801 and we will sort it out.
Yes — monthly options show right under the Add to Cart button. Affirm, Klarna, PayPal Pay Later and Snap Finance are offered at checkout, and checking what you qualify for does not affect your credit score.
Install and care: Flanges
- Before you start, read the maker's guide on this page end to end and lay out every part against the What's in the box list.
- Do torque every fastener to the maker's figure with a torque wrench, and re-check it after the first drive.
- Don't force a part that does not line up: check the vehicle list on this page against your exact year and trim first.