Brushed Beyern wheels bring a machined, satin-grained face to a lineup built specifically for BMW fitments. The brushed look here lives in two distinct finishes carried across the range: Matte Gunmetal w/ Brushed Face and Gloss Gunmetal w/ Brushed Face, both pairing a tonal gunmetal base with a directional brushed surface that catches light without the mirror flash of chrome or polished options.
Shop Brushed Beyern Wheels
Showing 36 in stock.
Shop all Brushed Beyern wheels →
Why a Brushed Face Works on a BMW
Beyern is a specialty manufacturer focused on rims for BMW cars, and the brushed-face treatment plays to that strength. A brushed grain reads as understated and modern in daylight, then deepens toward the gunmetal undertone in shade, giving these wheels a different character than a flat black or bright silver. Because Beyern wheels have passed major certifications and are among the few TUV-rated options on the market, the engineering behind the finish is matched by a wheel made to tight, hub-centric tolerances. If you want the gunmetal family without the brushing, the gray and gunmetal finishes are worth comparing side by side.
Models & Brushed Finishes
The brushed face appears on two models, each a monoblock design. The DMN carries the Matte Gunmetal w/ Brushed Face finish, exemplified by the Beyern DAMON 5x112 18x8.5 +20 Matte Gunmetal w/ Brushed Face. The RITZ carries the Gloss Gunmetal w/ Brushed Face, a glossier take on the same brushed concept. Both sit within the broader Beyern lineup, so you can cross-shop against alternate finishes on the same body.
Related Beyern Models
If the brushed gunmetal look isn't quite right, the ANTLER, AUTOBAHN, AVIATIC, and GERADE cover mesh, split-spoke, and multi-spoke shapes in matte black, gloss black, and mirror-cut finishes.
Fitment Coverage
The brushed-face models are offered in 5x112 and 5x120 bolt patterns, the two patterns most associated with modern and earlier BMW platforms respectively. Shop the full Beyern 5x112 and Beyern 5x120 ranges to confirm your hub. Diameters for the DMN and RITZ run from 18 up through 22 inches, so you'll find brushed options on the 18", 19", 20", and 22" pages. (Smaller 17-inch sizes exist elsewhere in the line, like the 17" options, though those models carry non-brushed finishes.)
How to Choose
Start with your bolt pattern, then decide between matte and gloss. The matte gunmetal on the DMN softens reflections and hides road grime, a practical pick for a daily BMW. The gloss gunmetal on the RITZ keeps the brushed grain but adds depth and shine for a more finished look. From there, pick a diameter that matches your tire and brake clearance goals. Prefer a bolder face? The RITZ in Gloss Black and the DAMON in Gloss Black are clean alternatives on the same platforms.
Frequently Asked Questions
Which Beyern wheels have a brushed face?
The brushed face is offered on the DMN in Matte Gunmetal w/ Brushed Face and on the RITZ in Gloss Gunmetal w/ Brushed Face.
What bolt patterns do the brushed Beyern wheels use?
Both brushed-face models are available in 5x112 and 5x120, the patterns tied to modern and earlier BMW fitments.
What sizes can I get the brushed finish in?
The DMN and RITZ are offered from 18 inches up to 22 inches.