2019 INFINITI Q50 Wheels and Rims

Popular 5x114.3 wheels that fit the 2019 INFINITI Q50

In-stock and ready to ship in this vehicle's bolt pattern. See the full fitment-filtered selection below.

Shop all 5x114.3 wheels »

The 2019 INFINITI Q50 hides a real performance sedan under its luxury-cruiser skin, and the right wheels are what wake that VR-platform character up. Whether you run the twin-turbo Red Sport or a base AWD car, the stock setup leaves obvious room for a flush, aggressive look without sacrificing daily comfort. Every fitment here is verified for your Q50, ships free, and financing is available so you can split the cost of a proper set.

2019 INFINITI Q50 fitment specs

  • Bolt pattern: 5x114.3
  • Center bore: 66.1mm
  • OE wheel diameter: 17" to 19"
  • OE offset range: +45 to +50
  • Setup: square (non-staggered)
  • Drivetrain: AWD

Since this is one of the most common patterns on the road, you can shop all 5x114.3 wheels to cross-shop everything that bolts up.

Recommended setups

  • Rohana — deep concave faces that fill the Q50's arches with that show-sedan stance enthusiasts chase.
  • Avant Garde — clean, luxury-leaning designs that match the Q50's executive lines while dropping serious curb appeal.
  • Enkei — lightweight, well-made options if you'd rather cut rotating mass and keep the AWD car responsive.

Wheel & fitment guides

Start with our breakdown in Q50 Red Sport Wheels: The Only Guide You'll Ever Need, then see our picks in You NEED these wheels for your Infiniti Q50. If you're weighing build quality, Cast vs Forged Wheels: What Actually Matters for Your Build explains where the money really goes.

Ready to commit? See them on your Q50 in the visualizer, browse real builds in the customer gallery, and lock in a mounted and balanced setup with the Package Builder.

Shopping a different year? Compare the 2015, 2016, 2017, 2018, 2020, and 2021 Q50, or head to the INFINITI hub.

There are no products listed under this category.

Popular 5x114.3 wheels that fit the 2019 INFINITI Q50

In-stock and ready to ship in this vehicle's bolt pattern. See the full fitment-filtered selection below.

Shop all 5x114.3 wheels »

The 2019 INFINITI Q50 hides a real performance sedan under its luxury-cruiser skin, and the right wheels are what wake that VR-platform character up. Whether you run the twin-turbo Red Sport or a base AWD car, the stock setup leaves obvious room for a flush, aggressive look without sacrificing daily comfort. Every fitment here is verified for your Q50, ships free, and financing is available so you can split the cost of a proper set.

2019 INFINITI Q50 fitment specs

  • Bolt pattern: 5x114.3
  • Center bore: 66.1mm
  • OE wheel diameter: 17" to 19"
  • OE offset range: +45 to +50
  • Setup: square (non-staggered)
  • Drivetrain: AWD

Since this is one of the most common patterns on the road, you can shop all 5x114.3 wheels to cross-shop everything that bolts up.

Recommended setups

  • Rohana — deep concave faces that fill the Q50's arches with that show-sedan stance enthusiasts chase.
  • Avant Garde — clean, luxury-leaning designs that match the Q50's executive lines while dropping serious curb appeal.
  • Enkei — lightweight, well-made options if you'd rather cut rotating mass and keep the AWD car responsive.

Wheel & fitment guides

Start with our breakdown in Q50 Red Sport Wheels: The Only Guide You'll Ever Need, then see our picks in You NEED these wheels for your Infiniti Q50. If you're weighing build quality, Cast vs Forged Wheels: What Actually Matters for Your Build explains where the money really goes.

Ready to commit? See them on your Q50 in the visualizer, browse real builds in the customer gallery, and lock in a mounted and balanced setup with the Package Builder.

Shopping a different year? Compare the 2015, 2016, 2017, 2018, 2020, and 2021 Q50, or head to the INFINITI hub.