2021 INFINITI Q50 Wheels and Rims

The 2021 INFINITI Q50 is a sleeper sport sedan built on Nissan's rear-biased platform, and with the available twin-turbo VR30 it deserves wheels that match its quiet aggression. Whether you run AWD grip or a tail-happy RWD setup, the right fitment sharpens turn-in and finally fills out those arches. Every order ships free with verified fitment for your Q50, and financing is available at checkout to spread the cost.

2021 INFINITI Q50 fitment specs

  • Bolt pattern: 5x114.3
  • Center bore: 66.1mm
  • OE wheel diameter: 17" to 19"
  • OE offset range: +45 to +50
  • Setup: square (non-staggered)
  • Drive: AWD
  • Body: Sedan

The 5x114.3 pattern is one of the most supported in the aftermarket, so you can shop all 5x114.3 wheels to cross-shop every fitment that bolts up.

Recommended setups

  • Rohana for deep-concave flush fitment that gives the Q50 the show-car stance it was missing from the factory.
  • Avant Garde for clean luxury-sport faces that suit the Q50's executive lines.
  • Enkei for lightweight performance if you autocross or just want quicker rotational response.

Wheel & fitment guides

Dialing in your setup is easier with our model-specific reads: see the Q50 Red Sport Wheels: The Only Guide You'll Ever Need and You NEED these wheels for your Infiniti Q50. Going aggressive on offset? Learn whether wheel spacers are safe before you order.

Ready to commit? See them on your Q50 in the Wheel Visualizer, browse real builds in our customer gallery, and lock in mounted-and-balanced setups with the Package Builder.

Comparing model years? Check 2015, 2016, 2017, 2018, 2019, and 2020, or visit the full INFINITI hub.

There are no products listed under this category.

The 2021 INFINITI Q50 is a sleeper sport sedan built on Nissan's rear-biased platform, and with the available twin-turbo VR30 it deserves wheels that match its quiet aggression. Whether you run AWD grip or a tail-happy RWD setup, the right fitment sharpens turn-in and finally fills out those arches. Every order ships free with verified fitment for your Q50, and financing is available at checkout to spread the cost.

2021 INFINITI Q50 fitment specs

  • Bolt pattern: 5x114.3
  • Center bore: 66.1mm
  • OE wheel diameter: 17" to 19"
  • OE offset range: +45 to +50
  • Setup: square (non-staggered)
  • Drive: AWD
  • Body: Sedan

The 5x114.3 pattern is one of the most supported in the aftermarket, so you can shop all 5x114.3 wheels to cross-shop every fitment that bolts up.

Recommended setups

  • Rohana for deep-concave flush fitment that gives the Q50 the show-car stance it was missing from the factory.
  • Avant Garde for clean luxury-sport faces that suit the Q50's executive lines.
  • Enkei for lightweight performance if you autocross or just want quicker rotational response.

Wheel & fitment guides

Dialing in your setup is easier with our model-specific reads: see the Q50 Red Sport Wheels: The Only Guide You'll Ever Need and You NEED these wheels for your Infiniti Q50. Going aggressive on offset? Learn whether wheel spacers are safe before you order.

Ready to commit? See them on your Q50 in the Wheel Visualizer, browse real builds in our customer gallery, and lock in mounted-and-balanced setups with the Package Builder.

Comparing model years? Check 2015, 2016, 2017, 2018, 2019, and 2020, or visit the full INFINITI hub.