2014 INFINITI Q60 Wheels and Rims

The 2014 INFINITI Q60 Convertible carries the last of the G-platform DNA: a rear-drive grand tourer with the VQ37 under the hood and a folding hardtop that begs for a cleaner, more deliberate wheel setup. With its RWD chassis and luxury-coupe stance, the right rims sharpen its profile without ruining the ride. Every fitment here is verified for your Q60, ships free, and financing is available at checkout so you can build the setup you actually want.

2014 INFINITI Q60 fitment specs

  • Bolt pattern: 5x114.3
  • Center bore: 66.1mm
  • OE wheel diameter: 18 inches
  • OE offset: ET43
  • Setup: square (non-staggered)
  • Drivetrain / body: RWD Convertible

The 5x114.3 pattern is one of the most widely supported in the aftermarket, so you can shop all 5x114.3 wheels to cross-shop everything that bolts to this chassis.

Recommended setups

  • Avant Garde — concave, luxury-coupe faces that suit the Q60's grand-touring character and flush ET43 fitment.
  • Rohana — clean, deep-lipped designs that bring show-car stance to a rear-drive convertible.
  • Enkei — lightweight cast and flow-formed options if you want to drop rotating mass and keep the chassis responsive.

Wheel & fitment guides

Since the Q60 runs a square 18x ET43 setup, getting the offset right is everything—read Wheel Offset Explained: Why ET Numbers Matter More Than Wheel Width before you commit to a width. If you plan to run a wider, lower setup, the camber, toe and caster guide will help you save your tires.

Use the Wheel Visualizer to see them on your Q60, browse real customer builds in the build gallery, then lock in a mounted and balanced setup with the Package Builder.

Looking at other model years? Compare the 2017 Q60 and 2018 Q60, or browse the full INFINITI hub.

There are no products listed under this category.

The 2014 INFINITI Q60 Convertible carries the last of the G-platform DNA: a rear-drive grand tourer with the VQ37 under the hood and a folding hardtop that begs for a cleaner, more deliberate wheel setup. With its RWD chassis and luxury-coupe stance, the right rims sharpen its profile without ruining the ride. Every fitment here is verified for your Q60, ships free, and financing is available at checkout so you can build the setup you actually want.

2014 INFINITI Q60 fitment specs

  • Bolt pattern: 5x114.3
  • Center bore: 66.1mm
  • OE wheel diameter: 18 inches
  • OE offset: ET43
  • Setup: square (non-staggered)
  • Drivetrain / body: RWD Convertible

The 5x114.3 pattern is one of the most widely supported in the aftermarket, so you can shop all 5x114.3 wheels to cross-shop everything that bolts to this chassis.

Recommended setups

  • Avant Garde — concave, luxury-coupe faces that suit the Q60's grand-touring character and flush ET43 fitment.
  • Rohana — clean, deep-lipped designs that bring show-car stance to a rear-drive convertible.
  • Enkei — lightweight cast and flow-formed options if you want to drop rotating mass and keep the chassis responsive.

Wheel & fitment guides

Since the Q60 runs a square 18x ET43 setup, getting the offset right is everything—read Wheel Offset Explained: Why ET Numbers Matter More Than Wheel Width before you commit to a width. If you plan to run a wider, lower setup, the camber, toe and caster guide will help you save your tires.

Use the Wheel Visualizer to see them on your Q60, browse real customer builds in the build gallery, then lock in a mounted and balanced setup with the Package Builder.

Looking at other model years? Compare the 2017 Q60 and 2018 Q60, or browse the full INFINITI hub.