2013 Ford F-150 Wheels and Rims

The 2013 F-150 is the workhorse half-ton that built its reputation on doing everything, from towing the boat to looking right at the job site or the trailhead. Whether your Crew Cab leans daily-driver or weekend overlander, the right wheel sets the attitude and the load capacity. Every fitment here ships free, is verified for your truck before it leaves the warehouse, and financing is available so you can build the setup you actually want.

2013 Ford F-150 fitment specs

  • Bolt pattern: 6x135
  • Center bore: 87.1mm
  • OE wheel diameter: 17"
  • OE offset range: +35 to +44
  • Setup: square (non-staggered)
  • Body / drive: Crew Cab Pickup, RWD

Running a different truck in the garage too? You can shop all 6x135 wheels to cross-shop everything that bolts to this pattern.

Recommended setups

  • Method Race — bead-grip-ready off-road designs built for the F-150 owner who actually airs down and wheels.
  • Fuel — aggressive offsets and finishes for a lifted, trail-ready stance that fills the fenders.
  • XD — rugged, value-driven looks that work on stock-height and mild-lift builds alike.

Wheel & fitment guides

Before you commit, read the Ford F-150 Wheel and Tire Guide: Stock to Lifted Sizing That Works for sizing that holds up from stock to lifted. If you want your new tires to last, the Wheel Alignment Settings That Save Your Tires: Camber, Toe & Caster Guide breaks down what to dial in after the swap.

Ready to visualize it? Use the Wheel Visualizer to see them on your F-150, browse real customer trucks in the build gallery, then lock in a mounted and balanced set with the Package Builder.

Looking at other years? Compare the 2010, 2012, 2014, 2015, 2016, and 2017 F-150, or head to the full Ford hub.

There are no products listed under this category.

The 2013 F-150 is the workhorse half-ton that built its reputation on doing everything, from towing the boat to looking right at the job site or the trailhead. Whether your Crew Cab leans daily-driver or weekend overlander, the right wheel sets the attitude and the load capacity. Every fitment here ships free, is verified for your truck before it leaves the warehouse, and financing is available so you can build the setup you actually want.

2013 Ford F-150 fitment specs

  • Bolt pattern: 6x135
  • Center bore: 87.1mm
  • OE wheel diameter: 17"
  • OE offset range: +35 to +44
  • Setup: square (non-staggered)
  • Body / drive: Crew Cab Pickup, RWD

Running a different truck in the garage too? You can shop all 6x135 wheels to cross-shop everything that bolts to this pattern.

Recommended setups

  • Method Race — bead-grip-ready off-road designs built for the F-150 owner who actually airs down and wheels.
  • Fuel — aggressive offsets and finishes for a lifted, trail-ready stance that fills the fenders.
  • XD — rugged, value-driven looks that work on stock-height and mild-lift builds alike.

Wheel & fitment guides

Before you commit, read the Ford F-150 Wheel and Tire Guide: Stock to Lifted Sizing That Works for sizing that holds up from stock to lifted. If you want your new tires to last, the Wheel Alignment Settings That Save Your Tires: Camber, Toe & Caster Guide breaks down what to dial in after the swap.

Ready to visualize it? Use the Wheel Visualizer to see them on your F-150, browse real customer trucks in the build gallery, then lock in a mounted and balanced set with the Package Builder.

Looking at other years? Compare the 2010, 2012, 2014, 2015, 2016, and 2017 F-150, or head to the full Ford hub.