2013 Hyundai Genesis-Coupe Wheels and Rims

The 2013 Hyundai Genesis Coupe arrived as Korea's answer to the rear-drive sport coupe formula, a front-engine, RWD chassis that begs for a proper square fitment and a serious set of wheels. Whether you're running the turbo 2.0T or the silky 3.8 V6, the right rolling stock transforms how this BK platform looks and turns in. Every set ships free with verified fitment for your car, and financing is available to spread the cost of a quality wheel-and-tire setup.

2013 Hyundai Genesis Coupe fitment specs

  • Bolt pattern: 5x114.3
  • Center bore: 67.1mm
  • OE wheel diameter: 18 inches
  • OE offset: +33
  • Setup: square (non-staggered)
  • Drivetrain: RWD

The Genesis Coupe shares its 5x114.3 pattern with a huge swath of JDM and performance metal, so you can shop all 5x114.3 wheels to cross-shop everything that bolts up.

Recommended setups

  • Enkei — flow-formed lightweight options that drop unsprung weight for sharper turn-in on the twisties.
  • Aodhan — aggressive concave faces and deep lips for a flush, stanced look without breaking the bank.
  • ESR — clean multi-spoke and mesh designs that suit the BK's broad-shouldered stance.

Wheel & fitment guides

Dial in your numbers with our breakdown of the best wheel specs for the Hyundai Genesis Coupe, weigh your options against the rival in Genesis Coupe vs 350Z, and dig into the V6 in our 3.8 BK2 buying guide. Before you finalize fitment, learn how to protect your rubber with our camber, toe and caster alignment guide.

Use the Wheel Visualizer to see them on your Genesis Coupe, browse real builds in the customer gallery, and lock in a mounted, balanced setup through the Package Builder.

Looking at other model years? Check the 2010 and 2011 Genesis Coupe pages, or browse all new wheels.

There are no products listed under this category.

The 2013 Hyundai Genesis Coupe arrived as Korea's answer to the rear-drive sport coupe formula, a front-engine, RWD chassis that begs for a proper square fitment and a serious set of wheels. Whether you're running the turbo 2.0T or the silky 3.8 V6, the right rolling stock transforms how this BK platform looks and turns in. Every set ships free with verified fitment for your car, and financing is available to spread the cost of a quality wheel-and-tire setup.

2013 Hyundai Genesis Coupe fitment specs

  • Bolt pattern: 5x114.3
  • Center bore: 67.1mm
  • OE wheel diameter: 18 inches
  • OE offset: +33
  • Setup: square (non-staggered)
  • Drivetrain: RWD

The Genesis Coupe shares its 5x114.3 pattern with a huge swath of JDM and performance metal, so you can shop all 5x114.3 wheels to cross-shop everything that bolts up.

Recommended setups

  • Enkei — flow-formed lightweight options that drop unsprung weight for sharper turn-in on the twisties.
  • Aodhan — aggressive concave faces and deep lips for a flush, stanced look without breaking the bank.
  • ESR — clean multi-spoke and mesh designs that suit the BK's broad-shouldered stance.

Wheel & fitment guides

Dial in your numbers with our breakdown of the best wheel specs for the Hyundai Genesis Coupe, weigh your options against the rival in Genesis Coupe vs 350Z, and dig into the V6 in our 3.8 BK2 buying guide. Before you finalize fitment, learn how to protect your rubber with our camber, toe and caster alignment guide.

Use the Wheel Visualizer to see them on your Genesis Coupe, browse real builds in the customer gallery, and lock in a mounted, balanced setup through the Package Builder.

Looking at other model years? Check the 2010 and 2011 Genesis Coupe pages, or browse all new wheels.