2007 Honda Civic Wheels and Rims

The 8th-gen Civic Coupe arrived in 2007 with a wedge-shaped silhouette and a chassis that begged to be dropped and dialed in, making it one of the most rewarding canvases in the front-drive tuning world. Whether you're chasing flush stance or shedding rotating mass for autocross weekends, we back every order with free shipping, verified fitment, and financing so you can build the way you want. Browse the right specs below before you commit.

2007 Honda Civic fitment specs

  • Bolt pattern: 5x114.3
  • Center bore: 64.1mm
  • OE wheel diameter: 15" to 17"
  • OE offset: +45
  • Setup: square (non-staggered), FWD Coupe

Since this generation runs the popular 5x114.3 pattern, you can shop all 5x114.3 wheels and cross-shop everything that bolts up.

Recommended setups

  • Enkei for lightweight, time-tested designs that wake up the Civic's revvy engine without adding unsprung weight.
  • Konig for affordable, aggressive fitment that nails the flush daily-sporty look this coupe wears so well.
  • Aodhan for concave, stance-focused profiles when you want show-car presence on a budget.

Wheel & fitment guides

Dialing in offset and width is everything on this platform, so start with the 10th Gen Honda Civic Wheel Fitment Guide: Every Size from Stock to Slammed for sizing logic that carries over, and read Cast vs Forged Wheels: What Actually Matters for Your Build to decide where to spend.

Ready to commit? See them on your Civic with the Wheel Visualizer, pull inspiration from real builds in the customer gallery, and lock in a mounted, balanced setup through the Package Builder.

Cross-shop other years: 2004, 2005, 2006, 2008, 2009, and 2010.

There are no products listed under this category.

The 8th-gen Civic Coupe arrived in 2007 with a wedge-shaped silhouette and a chassis that begged to be dropped and dialed in, making it one of the most rewarding canvases in the front-drive tuning world. Whether you're chasing flush stance or shedding rotating mass for autocross weekends, we back every order with free shipping, verified fitment, and financing so you can build the way you want. Browse the right specs below before you commit.

2007 Honda Civic fitment specs

  • Bolt pattern: 5x114.3
  • Center bore: 64.1mm
  • OE wheel diameter: 15" to 17"
  • OE offset: +45
  • Setup: square (non-staggered), FWD Coupe

Since this generation runs the popular 5x114.3 pattern, you can shop all 5x114.3 wheels and cross-shop everything that bolts up.

Recommended setups

  • Enkei for lightweight, time-tested designs that wake up the Civic's revvy engine without adding unsprung weight.
  • Konig for affordable, aggressive fitment that nails the flush daily-sporty look this coupe wears so well.
  • Aodhan for concave, stance-focused profiles when you want show-car presence on a budget.

Wheel & fitment guides

Dialing in offset and width is everything on this platform, so start with the 10th Gen Honda Civic Wheel Fitment Guide: Every Size from Stock to Slammed for sizing logic that carries over, and read Cast vs Forged Wheels: What Actually Matters for Your Build to decide where to spend.

Ready to commit? See them on your Civic with the Wheel Visualizer, pull inspiration from real builds in the customer gallery, and lock in a mounted, balanced setup through the Package Builder.

Cross-shop other years: 2004, 2005, 2006, 2008, 2009, and 2010.