Handlebar Clamps

Handlebar Clamps: the part that ties your bars to the bike

Handlebar clamps are the pieces that hold your bars down onto the risers or triple clamp and keep them from twisting under load. When you grab the brake hard or throw weight into a corner, this is the joint that keeps your bar position honest. Fit new handlebar clamps when you're changing bar height or rise, replacing worn or corroded hardware, or you just want a cleaner look up top. A clamp with a different rise also lets you adjust how high the bars sit without buying a whole new bar.

What ThreePiece stocks

Right now this category shows 3 clamps from 2 brands: Renthal and Bikers Choice. Prices run from $47 to $155 for what's in stock, which is the current range and not a fixed promise. At the top end, the Renthal Integra 35 Handlebar Clamp 45 mm / +10 Rise adds height while it clamps. On the chrome side, the Bikers Choice 74-Up Chrome Finned Handlebar Clamp and the Bikers Choice 74-Up Chrome Clamp Without Skirt cover replacement and restyle work.

How to choose

Start with the job. If you want to raise the bars, a rise clamp like the Renthal +10 Rise piece does two things at once and saves you a bar swap. If you're just replacing tired hardware or going for a look, the Bikers Choice chrome clamps are the cheaper route and the finned version is the more decorative of the two.

  • Rise vs. flat: a rise clamp changes your riding position; a flat clamp keeps it as-is.
  • Finish: chrome for a traditional look, versus a plainer functional clamp.
  • Skirt vs. no skirt: the without-skirt clamp is the leaner, lower-cost option.
  • Budget: spend at the low end for straight replacement, more if you want the rise and the machined look.

What else you need with it

Clamps and bars work as a pair, so check Handlebars if you're changing rise or bend. While the bars are apart, it's the right time to sort out the controls and lighting hung off them: Mirrors, Turn Signals, and Headlights all bolt up in the same area. For wider exterior work, browse LED Light Bars and the full Exterior section.

Fitment and ordering

None of these clamps carry listed vehicle fitment data in this category, so confirm your bar diameter and mounting before you buy. Call fitment help at 813-535-5801 or reach us through contact us if you're unsure which clamp matches your setup. Every order ships with free shipping, and Affirm and Katapult financing is available at checkout.

Handlebar Clamps: the part that ties your bars to the bike

Handlebar clamps are the pieces that hold your bars down onto the risers or triple clamp and keep them from twisting under load. When you grab the brake hard or throw weight into a corner, this is the joint that keeps your bar position honest. Fit new handlebar clamps when you're changing bar height or rise, replacing worn or corroded hardware, or you just want a cleaner look up top. A clamp with a different rise also lets you adjust how high the bars sit without buying a whole new bar.

What ThreePiece stocks

Right now this category shows 3 clamps from 2 brands: Renthal and Bikers Choice. Prices run from $47 to $155 for what's in stock, which is the current range and not a fixed promise. At the top end, the Renthal Integra 35 Handlebar Clamp 45 mm / +10 Rise adds height while it clamps. On the chrome side, the Bikers Choice 74-Up Chrome Finned Handlebar Clamp and the Bikers Choice 74-Up Chrome Clamp Without Skirt cover replacement and restyle work.

How to choose

Start with the job. If you want to raise the bars, a rise clamp like the Renthal +10 Rise piece does two things at once and saves you a bar swap. If you're just replacing tired hardware or going for a look, the Bikers Choice chrome clamps are the cheaper route and the finned version is the more decorative of the two.

  • Rise vs. flat: a rise clamp changes your riding position; a flat clamp keeps it as-is.
  • Finish: chrome for a traditional look, versus a plainer functional clamp.
  • Skirt vs. no skirt: the without-skirt clamp is the leaner, lower-cost option.
  • Budget: spend at the low end for straight replacement, more if you want the rise and the machined look.

What else you need with it

Clamps and bars work as a pair, so check Handlebars if you're changing rise or bend. While the bars are apart, it's the right time to sort out the controls and lighting hung off them: Mirrors, Turn Signals, and Headlights all bolt up in the same area. For wider exterior work, browse LED Light Bars and the full Exterior section.

Fitment and ordering

None of these clamps carry listed vehicle fitment data in this category, so confirm your bar diameter and mounting before you buy. Call fitment help at 813-535-5801 or reach us through contact us if you're unsure which clamp matches your setup. Every order ships with free shipping, and Affirm and Katapult financing is available at checkout.