2018 Honda Accord Wheels and Rims

The 10th-gen CV2 Accord reset what a midsize sedan could be: lower, wider, and genuinely fun thanks to that turbocharged platform and a fastback silhouette that begs for a proper set of wheels. Whether you're chasing daily refinement or a flush show stance, every set here ships free with verified fitment for your 2018 Accord, and financing is available at checkout to spread the cost.

2018 Honda Accord fitment specs

  • Bolt pattern: 5x114.3
  • Center bore: 64.1mm
  • OE wheel diameter: 16"–17"
  • OE offset range: +45 to +50
  • Setup: square (non-staggered), FWD sedan

Running the common 5x114.3 pattern means a deep catalog to cross-shop, so shop all 5x114.3 wheels to see everything that bolts up.

Recommended setups

  • Rotiform — clean, concave faces that nail the flush look the CV2's wide body was made for.
  • Enkei — proven lightweight castings that sharpen turn-in without punishing your daily ride.
  • ESR — aggressive offsets and budget-friendly stance for a poke-and-tuck setup.

Wheel & fitment guides

New to the platform? Start with Why You Should Buy - The 10th Gen CV2 Honda Accord to understand what makes this chassis special. If you plan to drop it on aftermarket wheels, read Rear Camber Arms Explained: Why Your Lowered Car Needs Them before you finalize your fitment.

Ready to commit? See them on your Accord in the Wheel Visualizer, browse real builds in the customer gallery, then lock in a mounted-and-balanced setup with the Package Builder.

Shopping another year? Compare fitment for 2015, 2016, 2017, 2019, 2020, and 2021 Accords.

There are no products listed under this category.

The 10th-gen CV2 Accord reset what a midsize sedan could be: lower, wider, and genuinely fun thanks to that turbocharged platform and a fastback silhouette that begs for a proper set of wheels. Whether you're chasing daily refinement or a flush show stance, every set here ships free with verified fitment for your 2018 Accord, and financing is available at checkout to spread the cost.

2018 Honda Accord fitment specs

  • Bolt pattern: 5x114.3
  • Center bore: 64.1mm
  • OE wheel diameter: 16"–17"
  • OE offset range: +45 to +50
  • Setup: square (non-staggered), FWD sedan

Running the common 5x114.3 pattern means a deep catalog to cross-shop, so shop all 5x114.3 wheels to see everything that bolts up.

Recommended setups

  • Rotiform — clean, concave faces that nail the flush look the CV2's wide body was made for.
  • Enkei — proven lightweight castings that sharpen turn-in without punishing your daily ride.
  • ESR — aggressive offsets and budget-friendly stance for a poke-and-tuck setup.

Wheel & fitment guides

New to the platform? Start with Why You Should Buy - The 10th Gen CV2 Honda Accord to understand what makes this chassis special. If you plan to drop it on aftermarket wheels, read Rear Camber Arms Explained: Why Your Lowered Car Needs Them before you finalize your fitment.

Ready to commit? See them on your Accord in the Wheel Visualizer, browse real builds in the customer gallery, then lock in a mounted-and-balanced setup with the Package Builder.

Shopping another year? Compare fitment for 2015, 2016, 2017, 2019, 2020, and 2021 Accords.