2003 Lexus GS300 Wheels and Rims

The 2003 Lexus GS300 sits in that sweet spot where Japanese luxury meets a rear-drive chassis begging for the right wheels. The silky 2JZ-GE up front and a balanced RWD platform underneath mean this is more than a quiet executive sedan, and the right set transforms its understated lines into something with genuine presence. Every wheel here ships free, is checked against verified GS300 fitment, and financing is available so you can build the setup you actually want.

2003 Lexus GS300 fitment specs

  • Bolt pattern: 5x114.3
  • Center bore: 60.1mm
  • OE wheel diameter: 16 inches
  • OE offset: ET40
  • Setup: square (non-staggered)
  • Drivetrain: RWD sedan

The GS300 runs one of the most common patterns on the road, so you can shop all 5x114.3 wheels and cross-shop a huge catalog while keeping that 60.1mm bore in mind for a hubcentric fit.

Recommended setups

  • Work for authentic JDM craftsmanship and dialed-in concave that suits the GS300's executive character.
  • Enkei if you want lightweight, well-priced performance that wakes up the rear-drive handling.
  • Rohana for an affordable flush, deep-lip stance that flatters the long sedan profile.

Wheel & fitment guides

Going wider or chasing a lower offset than the factory ET40? Read Wheel Offset Explained: Why ET Numbers Matter More Than Wheel Width before you commit to a spec, so your fitment stays clean and rub-free.

Use the Wheel Visualizer to see them on your GS300, browse real builds in the customer gallery, and lock in mounted and balanced sets with the Package Builder.

Cross-shop other model years like the 2002 and 2004 GS300, or explore the full Lexus hub.

There are no products listed under this category.

The 2003 Lexus GS300 sits in that sweet spot where Japanese luxury meets a rear-drive chassis begging for the right wheels. The silky 2JZ-GE up front and a balanced RWD platform underneath mean this is more than a quiet executive sedan, and the right set transforms its understated lines into something with genuine presence. Every wheel here ships free, is checked against verified GS300 fitment, and financing is available so you can build the setup you actually want.

2003 Lexus GS300 fitment specs

  • Bolt pattern: 5x114.3
  • Center bore: 60.1mm
  • OE wheel diameter: 16 inches
  • OE offset: ET40
  • Setup: square (non-staggered)
  • Drivetrain: RWD sedan

The GS300 runs one of the most common patterns on the road, so you can shop all 5x114.3 wheels and cross-shop a huge catalog while keeping that 60.1mm bore in mind for a hubcentric fit.

Recommended setups

  • Work for authentic JDM craftsmanship and dialed-in concave that suits the GS300's executive character.
  • Enkei if you want lightweight, well-priced performance that wakes up the rear-drive handling.
  • Rohana for an affordable flush, deep-lip stance that flatters the long sedan profile.

Wheel & fitment guides

Going wider or chasing a lower offset than the factory ET40? Read Wheel Offset Explained: Why ET Numbers Matter More Than Wheel Width before you commit to a spec, so your fitment stays clean and rub-free.

Use the Wheel Visualizer to see them on your GS300, browse real builds in the customer gallery, and lock in mounted and balanced sets with the Package Builder.

Cross-shop other model years like the 2002 and 2004 GS300, or explore the full Lexus hub.