1990 Nissan 300ZX Wheels and Rims

The 1990 Nissan 300ZX (Z32) arrived as a clean-sheet rethink of Nissan's grand-touring coupe: low, wide, and unmistakably early-'90s JDM. Whether you're chasing a period-correct stance or fresh rubber for spirited rear-wheel-drive driving, our wheels ship free, come with verified fitment for your exact Z32, and financing is available at checkout.

1990 Nissan 300ZX fitment specs

  • Bolt pattern: 5x114.3
  • Center bore: 66.1mm
  • OE wheel diameter: 15 in
  • OE offset: ET43
  • Setup: square (non-staggered)
  • Layout: RWD coupe

Because the Z32 runs the ubiquitous 5x114.3 pattern, you can shop all 5x114.3 wheels and cross-shop everything that bolts up.

Recommended setups

  • Volk Racing — forged, featherweight JDM motorsport wheels that suit the Z32's heritage and shed unsprung mass.
  • Work — deep-lip, dialed-in fitment for the classic stanced Z look this chassis wears so well.
  • Enkei — lightweight, value-driven performance for owners who track or carve canyons.

Wheel & fitment guides

Since the Z32 rewards precise setup, learn why ET numbers matter more than wheel width before you commit to an offset away from the stock ET43.

Ready to picture it? See them on your 300ZX in the Wheel Visualizer, browse real builds in our customer gallery, and spec a mounted-and-balanced setup with the Package Builder.

Looking at other model years? Compare the 1991 and 1993 300ZX, or head to the full Nissan hub.

There are no products listed under this category.

The 1990 Nissan 300ZX (Z32) arrived as a clean-sheet rethink of Nissan's grand-touring coupe: low, wide, and unmistakably early-'90s JDM. Whether you're chasing a period-correct stance or fresh rubber for spirited rear-wheel-drive driving, our wheels ship free, come with verified fitment for your exact Z32, and financing is available at checkout.

1990 Nissan 300ZX fitment specs

  • Bolt pattern: 5x114.3
  • Center bore: 66.1mm
  • OE wheel diameter: 15 in
  • OE offset: ET43
  • Setup: square (non-staggered)
  • Layout: RWD coupe

Because the Z32 runs the ubiquitous 5x114.3 pattern, you can shop all 5x114.3 wheels and cross-shop everything that bolts up.

Recommended setups

  • Volk Racing — forged, featherweight JDM motorsport wheels that suit the Z32's heritage and shed unsprung mass.
  • Work — deep-lip, dialed-in fitment for the classic stanced Z look this chassis wears so well.
  • Enkei — lightweight, value-driven performance for owners who track or carve canyons.

Wheel & fitment guides

Since the Z32 rewards precise setup, learn why ET numbers matter more than wheel width before you commit to an offset away from the stock ET43.

Ready to picture it? See them on your 300ZX in the Wheel Visualizer, browse real builds in our customer gallery, and spec a mounted-and-balanced setup with the Package Builder.

Looking at other model years? Compare the 1991 and 1993 300ZX, or head to the full Nissan hub.